Electronics Forum: delta systems (Page 1 of 4)

vitronics delta 6622 fluxer

Electronics Forum | Wed Mar 17 10:12:16 EDT 2010 | dj_jago

Is it the pressurized system or the pump system you have fitted to the machine? Are you getting an error message 'No flow nozzle 1'? Check the 'ShoRate' gauge at the back of the machine and make sure the ball bearing rises in the glass tube when you

vitronics delta 6622 fluxer

Electronics Forum | Thu Mar 18 07:58:43 EDT 2010 | mun4o

It is a pressurized system, and , Yes , there are a message "No flow nozzle 1".Our machine have not 'ShoRate' gauge at the back of the machine.There are only 3 gauge for flow on the front side , like watch ???

vitronics delta 6622 fluxer

Electronics Forum | Wed Mar 17 04:26:44 EDT 2010 | mun4o

Hi, we have vitronics delta 6622 in your production.Problem with fluxer starting 3 weeks ago.Fluxer moving, but not spraing????I check flux system , and dont find any problems with machine.Clean the spray nozzle with compressed air , but nothing.may

vitronics delta wave malfunction errors :pcb expected at exit

Electronics Forum | Fri Sep 14 08:53:43 EDT 2012 | mbnetto

Hi, Recently we acquired a Delta 3 and I noticed everytime we change any value regarding to the tracking system, as chip or main wave - offtime/ontime- with boards loaded on it, the tracking system doesnt work well. sometimes it turns off the wave o

Re: vapor phase reflow

Electronics Forum | Fri Nov 19 05:12:21 EST 1999 | Graham Naisbitt

Steve, If you can get me your snail-mail address, I will send you some latest information. We actually have a totally new system called Delta 5. It is Condensation Soldering rather than Vapour phase, the difference being that we solder in an air ti

Heller 1800 exl wiring

Electronics Forum | Thu Jun 15 14:51:37 EDT 2017 | bmalhi

If machine serial tag referring to 3Ph, 208-240V then you cannot apply 3Ph, 380V. In order to use 3Ph, 380V supply you have, machine needs to be retrofitted to work with this voltage. If you apply 380V without voltage conversion, you will damage som

Which one is better Soltec Delta-X or Ersa Powerflow N2 wave solder machine?

Electronics Forum | Mon Jun 29 07:17:25 EDT 2015 | donlockard

Seho maxi wave 3240 should be considered as well. Invented full tunnel nitrogen systems that have lower operating costs and provide yields unlike what can be achieved by air wave systems.

Time to retire the wave?

Electronics Forum | Tue May 22 16:07:54 EDT 2007 | grantp

Hi, Thanks for all the info. Do you have a Nitrogen generator for the selective soldering machine? How does the cost of running that compare to the cost of keeping that big pot in the Delta wave hot? Have you ever experimented with check the costs

Reflow oven recommendation

Electronics Forum | Fri Dec 03 16:00:48 EST 2010 | glenseely

When faced with high mass, high cost, sensitive PCBs and now with the added challenges of Pb-Free Vapor Phase is the only safe reflow method for component and joint integrity. A-Tek is the National Distributor for Asscon Vapor phase reflow. Asscon

Heller 1088 Reflow Oven Conveyor Adjust

Electronics Forum | Tue Dec 18 18:37:35 EST 2001 | Dreamsniper

Hi, Forgive me for my stupidity. Has anyone moved the fixed side of the Heller's Edge hold conveyor by 50mm ? I need infos on how they did it. This is because of the high delta T that we are getting from our oven which is between 20 to 20 deg. C from

  1 2 3 4 Next

delta systems searches for Companies, Equipment, Machines, Suppliers & Information

SMT spare parts - Qinyi Electronics

Reflow Soldering 101 Training Course
Win Source Online Electronic parts

Software for SMT placement & AOI - Free Download.
SMT feeders

Best Reflow Oven