Electronics Forum | Fri Aug 08 11:37:09 EDT 2008 | pjc
Yes, sure. In fact in some applications ICT is coming back. Mainly due to the fact that more and more SMT discrete components have no markings, so AOI cannot tell you if you have the correct value on the PCB. Fixed pin or flying probe ICT is a valuab
Electronics Forum | Wed Oct 08 12:41:08 EDT 2008 | sambolian
I having trouble with the Quad IIc. After manually teaching a program at the machine, I upload to save it, then when I go to "Run System", it downloads the program, but then an error comes up saying "Fiducials not taught, press ESC to abort". I've tr
Electronics Forum | Wed Jun 27 22:03:48 EDT 2012 | davef
Here's some notes I've collected over the years on the topic ... Small MRP * I havent used it [DBA Manufacturing] yet but I do find myself keep coming back to it - I have been searching for a decent ERP system for my micro company for years. What I
Electronics Forum | Sat Mar 24 12:31:31 EDT 2007 | diesel_1t
Hi there. Ok, i have a little big question for fuji Erudites: when machine run out of parts on any device it tells to machine "parts out (and part number)" So, a signal from anywhere (maybe a PLC output) will tell to the machine "hey i'm out of parts
Electronics Forum | Thu Oct 08 12:11:34 EDT 1998 | Rick Wyman
| Does anyone know of an AOI system that can look at the solder joints of SMT chip devices (1206,0805 & 0603) and make a reliable presence/abscence call of the joint on a HASL PCB. A low false call rate (much less than 1%)is required. Any info. fro
Electronics Forum | Tue Nov 06 10:28:58 EST 2018 | davef
Media Links IPC Global Insight This weekly electronic newsletter includes IPC news and multimedia information on manufacturing and management best practices and solutions, new technologies, standards, government relations and environment, health and
Electronics Forum | Fri Apr 12 19:20:25 EDT 2013 | microaide
Some progress, now stuck again. I can now generate a pick and place program for two heads that actually runs the head 1 program when loaded into the central controller of machine #1. But all attempts at getting machine #2 to run the head 2 program ha
Electronics Forum | Tue Feb 21 10:45:45 EST 2012 | acsscott
Thanks for the password. There is a 7 pin connector for the Emergency stop in and out. It has a mate with a jumper wire attached to the Topaz end. If you put the jumpered mating connector on this, the emergency stop errors go away. The other conn
Electronics Forum | Mon Feb 01 04:57:08 EST 2016 | oxygensmd
If you can use the standalone mode then choose the program on "option" and somewhere you can load program - "aktuell". The "aktuell" program is the last program what was downloaded on this machine. In SiTest you can test and calibrate the machine. Y
Electronics Forum | Mon Mar 04 18:25:21 EST 2002 | Jones
I was wanting to know if anyone has had any luck at networking Panisonic equipment. We've purchased the Panacim package for one of our lines and have found that it was very costly and can create downtime. We are wanting the capability to download mas
