Electronics Forum | Tue Feb 19 09:24:25 EST 2019 | cyber_wolf
Reflow profiles are based on the product and materials you are soldering. You need profiling software and a data logger.
Electronics Forum | Tue Jul 06 15:24:38 EDT 2010 | flipit
Hi, I have seen the oscillation frequency change in higher humidity environments. Was doing some data acquisition in a high humitity environment in 1990 using some off the shelf loggers. The data that was collected was incorrect. Found out the cr
Electronics Forum | Thu Jun 01 09:31:26 EDT 2006 | marc
All data loggers will be warmer at the higher lead free temps. Only two ways around this... better thermal barriers or fans after the profile to cool it down. Some places do not allow fans on the production floor due to static electricity, in that
Electronics Forum | Tue Jul 18 09:46:42 EDT 2006 | SWAG
We run humidifiers in our shop because we are usually around 25% RH. We track this with a data-logger and RH device. It's dry here! Sometimes in the summer, it can get between 5 and 10% RH outside = thunderstorms/dry lightning and forest fires. I
Electronics Forum | Mon Aug 16 11:20:09 EDT 2004 | soease
Hi, to profile any type of temperature process, you should try ECD products. I'm used to work with their tool called Super M.O.L.E. Gold, wich is a data logger for six thermocouples that you can run through a reflow oven, for example, and then you c
Electronics Forum | Mon Oct 26 19:48:14 EST 1998 | Scott B.
| | What are the key feature to look for in buying a profiling product for Reflow ? | | | | Who's is the best and how much do these systems cost ? | | | | Thanks in advance. | | | | Hi Mark, | | I am currently the oven sector engineer for a larg
Electronics Forum | Fri Mar 03 20:45:58 EST 2006 | KEN
I have used KIC data acquisition equipment for over 11 years. Slim kic, sideKic and Kic2000, prophet etc... The 9 volt battry changes in seconds. Gimme a break. The internals don't reach 54Celsius. If it came down to batteries, I bet KIC would t
Electronics Forum | Tue Oct 27 04:19:40 EST 1998 | Mark
| | | | What are the key feature to look for in buying a profiling product for Reflow ? | | | | | | Who's is the best and how much do these systems cost ? | | | | | | Thanks in advance. | | | | | | Hi Mark, | | | | I am currently the oven secto
Electronics Forum | Fri Feb 10 12:09:53 EST 2006 | cyber_wolf
Russ, We use a unit called a Datapaq surveyor to monitor our ovens. Its basically a unit that a data logger rides through the oven in. It has 3 thermal couples across the top and 3 across the bottom. It takes measurements the full width of the proces
Electronics Forum | Tue Oct 27 10:10:21 EST 1998 | Chrys
| | | | | | What are the key feature to look for in buying a profiling product for Reflow ? | | | | | | | | Who's is the best and how much do these systems cost ? | | | | | | | | Thanks in advance. | | | | | | | | Hi Mark, | | | | | | I am curr
A leader in automated fluid dispensing, jetting, and conformal coating. Products include stand-alone dispensing workstations and fully automated, in-line conveyorized systems with advanced process controls.
2765 Loker Ave. West
Carlsbad, CA USA
Phone: 760-431-1919
winsouce.jpg)