Electronics Forum | Tue Dec 21 12:55:41 EST 2021 | oclsc
Hi SMTnet. I am planning to inspect the nozzles for our Fuji Aimex II on more regular basis. We have the H12HS and DX mountingheads. Are the any of you have there have some experiences in how often this should be done? I do know that it depends on t
Electronics Forum | Wed Dec 29 05:58:04 EST 2021 | sophyluo1985
According to the normal theory and the feedback of our other customers, maintenance is divided into 4 ways. (Depending on the environment of your production workshop, the work head is generally inspected monthly) 1. Daily maintenance: Clean the surfa
Electronics Forum | Wed Aug 04 08:37:24 EDT 2010 | keiths487
Just to get the simple stuff out of the way. Make > sure that no one has changed the machine nozzle > data to a different type. Then try actually > changing the nozzle data and putting that type > into the head. If this passes it will at least >
Electronics Forum | Tue Aug 03 12:20:38 EDT 2010 | namruht
Is this on all 6 nozzles on those particular heads or just some. Try swapping nozzles with another head to make sure you do not have nozzle issues.
Electronics Forum | Tue Aug 03 14:28:23 EDT 2010 | keiths487
the "hooks" appear to be in good shape and are holding the nozzles up...machine will run even utilizing those head/nozzle combinations...we will check the valve, and verify proper operation, during non-production time....
Electronics Forum | Tue Aug 03 14:32:04 EDT 2010 | keiths487
random nozzle and head combo's all around the turret...head 1,4,8,11,13,14 and always nozzle 1 or 2
Electronics Forum | Tue Aug 03 16:12:54 EDT 2010 | namruht
Just to get the simple stuff out of the way. Make sure that no one has changed the machine nozzle data to a different type. Then try actually changing the nozzle data and putting that type into the head. If this passes it will at least eliminate the
Electronics Forum | Thu Mar 22 17:18:17 EDT 2018 | rodrigo
Hi all, Our (new/used) CP642 resets the nozzles heads first time I do a nozzle centering after power on. But we're getting errors st17 and st19 and while working on the sensors I noticed that it does not resets the heads before I start a nozzle cent
Electronics Forum | Tue Aug 03 11:40:41 EDT 2010 | swag
HSP nozzles get pushed back up into the head by a cam with a pneumatic brake on it. Make sure this is functioning properly. It is not uncommon for the MAC valve that actuates the brake to get flaky = replace it. Also, the nozzles are mechanically
Electronics Forum | Tue Aug 03 10:11:11 EDT 2010 | keiths487
we have an HSP that keeps giving nozzle level (low) out of tolerance, we have performed lighting check, also this condition is only showing up on 3 or 4 heads...any input appreciated
