Electronics Forum | Mon Jan 16 16:19:22 EST 2006 | davef
Dunno. 4% higher standoff results in 16% higher reliability [�The Effects of Solder Joint Voiding on Plastic Ball Grid Array Reliability� Banks, Donald R., et al.; Proceedings of the Technical Program - Surface Mount International; September 10-12,
Electronics Forum | Thu Sep 24 18:57:03 EDT 2009 | davef
From "siliconfareast.com": Basic Die Cracking FA Flow 1) Failure Information/Device and Lot History Review. Understand the customer's description of the failure, i.e., the failure mode, where it was encountered, what conditions the sample was subject
Electronics Forum | Sat Jun 12 00:34:00 EDT 2004 | kanwal324
Hi ! The main problem being faced currently is formation of solder balls - to be precise, these are micro solder beads generally found attached with bodies of SOTs, Chip Caps, Chip Resistors, between pins of SOICs (50 mil) - lying on PCB surface,
Electronics Forum | Mon Jul 31 20:34:58 EDT 2017 | zsoden
Hi all, it has been a bit of a delay but I've finally had a chance to do some further investigation on this. First off, we spend some time to clean the solder bath using Kester Solder Saver and scooped out a lot of crap. We then added about 5kg of
Electronics Forum | Tue Jun 05 03:56:52 EDT 2001 | JohnW
Flip Chip/uBGA Underfill Visual Standards The aim of this document is to produce some draft text and then select photographs to make up a draft visual standard for inspection. There is also a need to produce some reference material for C Scan image
1 |