Electronics Forum | Wed Jun 03 07:59:16 EDT 1998 | Ying Yang
There are for you many issue and long is the road to digital happiness. UART well and modulate.
Electronics Forum | Wed Nov 15 10:26:54 EST 2000 | Rkevin
I'm looking for what I call Mylar, for lack of a better name. We used it at Digital/Compaq to help us knead paste and also to check alignment of prints without actually applying any paste to the module. It was about 4-5 mils thick, clear and came in
Electronics Forum | Wed Nov 15 10:24:23 EST 2000 | Rkevin
I'm looking for what I call Mylar, for lack of a better name. We used it at Digital/Compaq to help us knead paste and also to check alignment of prints without actually applying any paste to the module. It was about 4-5 mils thick, clear and came in
Electronics Forum | Fri Aug 18 09:29:20 EDT 2006 | chrisgriffin
I would measure the voltage on the yellow wire going to the air pressure sensor. Are you getting 24VDC? If so, maybe replace the input DC module on IO card #2. I think it is IDC module 8 on that board. Try not to have too many violent thoughts.
Electronics Forum | Thu Sep 14 17:18:30 EDT 2000 | Allan Overcast
I just purchased a used Philips CMS-84V pick and place machine and am curious if their software (CSM toolbox and/or CSM digitizer) is needed. I use the Protel for Windows PCB layout software. Any input would be helpful. Thanks!
Electronics Forum | Wed Aug 20 06:33:16 EDT 2008 | benefon
If this is machine is of the same type of construction as our 248 with the pneumatic table sliding mechanism, check the 'table out sensor' in the 'digital inputs' section of the diagnostics menu. rgds AR
Electronics Forum | Tue Jan 07 05:09:32 EST 2003 | Susan
Brian: I read your input with interest. I am looking for a senior person, Manufacturing Process Engineer with surface mount assembly exp for a client who manufactures wireless communication subsystems such as frequency sources for digital radio an
Electronics Forum | Tue Aug 16 14:03:00 EDT 2022 | proceng1
We currently use Aegis CircuitCam for our Production work instructions, and machine programs. I am looking for an alternative, as CC is no longer supported. We receive Gerbers (sometimes CAD files) and BOM from our customers. That is all that I can
Electronics Forum | Fri Dec 05 19:43:43 EST 1997 | Mike Clader
I would like to hear from anyone producing high mix (~200 modules) with low volumes (5-2000 per year) using an automatic line running lot sizes in the 5-50 range. We are engaged in an investigation to invest in this capability. A view into the orig
Electronics Forum | Sun Mar 29 22:55:06 EST 1998 | Yoshi Kuni
| I would like to hear from anyone producing high mix (~200 modules) with low volumes (5-2000 per year) using an automatic line running lot sizes in the 5-50 range. We are engaged in an investigation to invest in this capability. A view into the or
