Electronics Forum | Tue Jul 01 16:01:17 EDT 2003 | caldon
REX- Contact ACI 610-362-1200 x224. The contact person is Mr. Jeff Stong. They are cheap and will give you a report. www.aciusa.org jstong@aciusa.org There are some other labs that do this...but we use this one as it is close to us and they do a des
Electronics Forum | Tue Sep 30 17:56:38 EDT 2008 | davef
Some of the popular handheld digital microscope seem to be aimed at home science projects. Units that are priced similar to the Bodelin Technologies ProScope are: * Celestron 44300 Handheld Digital Microscope * Orion Microxplore PC200 Digital Handhe
Electronics Forum | Fri Oct 17 15:49:29 EDT 2008 | skumaravelu
Does any one know of digital scope that can hooked to a PC to aid the QC inspectors in inspecting the solder joints. We tried the pyroscope(http://www.theproscope.com/) and it didn't work well. Thanks
Electronics Forum | Thu Oct 23 11:25:15 EDT 2008 | muarty
Vision Engineering Lynx systems!!!!!!
Electronics Forum | Mon Oct 20 10:00:17 EDT 2008 | pjc
Yep, go to http://www.ysctech.com All camera scopes offer frame grabber and measurement software options.
Electronics Forum | Tue Oct 21 09:19:05 EDT 2008 | skumaravelu
30fps handheld scope(attached to a PC) to be used at the end of the SMT line after AOI inspection to aid the inspectors to review/clarify the locations that they observed in the AOI machine.
Electronics Forum | Mon Oct 20 17:38:20 EDT 2008 | davef
We hate to throw soft pitches, but here goes ... What are the specifications [eg, resolution, magnification, etc] for digital microscopes for: * Routine inspection * Failure analysis
Electronics Forum | Mon Aug 23 16:54:03 EDT 1999 | M Cox
This is out of the normal scope of this site but� I am in search of a Digital Camera for use with documentation instructions. What would be the Minimum Resolution that I should require? I will need details of assemblies such as Component Identific
Electronics Forum | Tue Aug 24 07:06:28 EDT 1999 | Brian
| This is out of the normal scope of this site but� | | I am in search of a Digital Camera for use with documentation instructions. What would be the Minimum Resolution that I should require? I will need details of assemblies such as Component Ide
Electronics Forum | Wed May 25 17:56:24 EDT 2011 | rssimmons
The SimmScope is an first article inspection system that uses an overhead digital microsope on a motorized gantry to inspect the board - much like an AOI - except that it does not automatically make the pass/fail decisions. It is up to the operator t
