Electronics Forum | Thu Jul 09 08:14:48 EDT 2009 | rway
We are looking into purchasing a Falcon ICT/FCT from Digital Test. Does anyone have any experience with this company or the machine? 1) How would you rate their technical support? 2) What are the functional test capabilities of their machines (pr
Electronics Forum | Tue Aug 21 19:24:15 EDT 2012 | rway
Checksum will work if all your doing is analog/passive testing. Checksum systems do not have digital test capability. I would recommend a Teradyne z18xx system. We use 8 of them in our plant and have been for years. Used, these systems range from
Electronics Forum | Tue Sep 04 02:28:17 EDT 2007 | philip_yam
Any one has experience over solder voids in oscillator capacitor joint could result in high phase noise during the digital performances test? The noise signal was gone after solder touch up. What could be the root cause of the high phase noise?
Electronics Forum | Fri Feb 11 11:17:07 EST 2005 | etienne
You mean that you have to test each resistor that you produce? Because with a digital multimeter it is very easy to test resistors. Maybe I am not understanding you?
Electronics Forum | Tue Nov 01 14:46:31 EDT 2011 | davef
Agilent TestJet Technology White Paper In the early 1990s, the testing of digital parts became problematical. Previous in-circuit test techniques sought to ensure a correct, functioning part by applying digital patterns, called vectors, to the input
Electronics Forum | Mon Jul 23 12:26:10 EDT 2007 | jdumont
We run a small piece of FR4 with a "thickness test" pattern before production and measure it after with a digital micrometer. Then we save the coupon with the W/O # written on it.
Electronics Forum | Thu Mar 19 02:35:48 EDT 2020 | franknguyen
Hi, I got a new project, and need to provide customer the ICT (In-Circuit-Testing), FPT (Flying-Probe-Testing) process quotation. The new PCBA contains analog components, digital components, and some BGAs that can support Boundary Scan. Does anyone
Electronics Forum | Wed Jul 30 11:06:57 EDT 2003 | Dale
I have 2 rechargable digital camera batteries. One came with it and one was bought some time later. Is there a way to test them to see which has the least wear? I want to find out which is closer to it's demise and which has the most charges left in
Electronics Forum | Thu Aug 16 12:44:28 EDT 2012 | cobham1
We are currently checking parts on our boards with a digital multimeter to make sure values are correct. This process takes a large amount of time and is very in accurate Can someone please recommend a low capital budget system that is good and repea
Electronics Forum | Mon Aug 08 16:14:36 EDT 2011 | wmburke
We are building a plasma diagnostic to monitor MHD phenomena in tokamak. As part of the development, we need high-voltage, high-power RF capacitors to tune and match an inductive load. This application is similar to a small induction heater, with t
