Electronics Forum | Wed Jan 06 23:01:48 EST 1999 | Dave F
| | Youse: This is SMTnet Steve. Sacrifice the socket. By the time you finish putzing-around removing the balls to get the socket off the board, replacing the lifted pads on the board, and reballing the socket; you've burnt the $100 that the socke
Electronics Forum | Thu Aug 09 12:36:26 EDT 2001 | Michael Parker
Adam- Mikie here. I too am placing 2 PBGA sockets on an assembly but they aren't mirror imaged. Thanks to the SMT Gods for that one. You say you added more paste to solve for open solder. Do you have x-ray? Were the alignments perfect? Also the part
Electronics Forum | Wed Jan 06 21:17:31 EST 1999 | Dave F
| Hey All you Einsteins out there!! | | I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket
Electronics Forum | Wed Jan 06 21:56:37 EST 1999 | Steve Gregory
| Youse: This is SMTnet Steve. Sacrifice the socket. By the time you finish putzing-around removing the balls to get the socket off the board, replacing the lifted pads on the board, and reballing the socket; you've burnt the $100 that the socket
Electronics Forum | Wed Jan 06 23:49:48 EST 1999 | Chris G.
| Hey All you Einsteins out there!! | | I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket
Electronics Forum | Wed Jan 06 19:43:15 EST 1999 | Steve Gregory
Hey All you Einsteins out there!! I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket, (act
Electronics Forum | Mon Feb 23 23:50:18 EST 1998 | mike
| Does anyone have any experience with via in pad for | BGAs using conventional thru hole technology? | Steve Joy Steve, I had a customer who had designed a board to use a BGA socket. Well the socket did not work out so we then placed the bga dire
Electronics Forum | Thu Jul 15 08:03:36 EDT 1999 | Mark Quealy
| | I am trying to solder a 388 ball BGA to an Andon Electronics Corp. BGA socket adapter and I am having problems in the reflow of this part. I put no clean paste flux in the solder cups of the adapter then put the BGA part onto the adapter and run
Electronics Forum | Thu Feb 18 17:06:33 EST 1999 | Dave Jurena
| Hope some of you out there can help me with this one. | I am getting feedback from our test department that they are showing opens on solder joints which have visually good wetting. The touch-up operators confirm that the joint looks good. All they
Electronics Forum | Mon May 03 16:39:44 EDT 2010 | jlawson
Thanks Larry We are loooking a bigger Vapor > machine which could soldered our big size > borad(600x600 mm)assembled with hundreds of > sockets and thousands of components. How about > IBL products? Anyone used before? You should also look at
