Electronics Forum | Mon Sep 20 15:32:27 EDT 2010 | naveed
Yes!tahnkx I made a backup disc.the all data for production files,and also the data base library(vision files for component and fiducials) has been copied to the disc.we are in contact with yamaha consultant,they sent us the new manual which has the
Electronics Forum | Fri Sep 03 08:42:01 EDT 2010 | naveed
hi!i have the disc labled mechine software and another labled upgraded software.but i dont have the procedure,or any sort of training regarding this.i got training from my teacher who visited japan trainig schdule,but for last 7 years i am doing all
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
Electronics Forum | Thu Nov 18 15:07:27 EST 2004 | valuems
Hello Boy this sure brings back memories from the years past. Was a field engineer for universal for about 9 years. Worked almost exclusively on the Rad 1 and Rad 2. The first thing that I would do is remove the sequencer head that fires at the sa
Electronics Forum | Wed Dec 09 05:01:33 EST 2015 | luki
Hello, I am a new user of the machine CSM84VZ III and learn to program. After formatting a disc machine lost all settings(I did not know that the settings are on the disc), most of which I have already set. Now I have a problem such that when I try t
Electronics Forum | Tue Oct 26 05:12:10 EDT 2021 | dilogic
Sorry, I attached the wrong file. EXM settings are explained in this one. No need for installation discs.
Electronics Forum | Tue Aug 17 11:51:52 EDT 2010 | arek
Hi, I bought Philips CSM machines (CSM66-III and CSM84V-III). I need flopy disc with some files (MCH, VIS, FDR). I created MCH file but the machine send me an error message: BAD FORMAT DATA. Could anyone help me and send me correct files. Thanks
Electronics Forum | Fri Jul 19 11:09:29 EDT 2019 | BigFuji642
Yes we have the hard copy of the proper data on a floppy disc. If we do not have the correct Proper Data, could it give me the error below? I was thinking it would make it past the log onto machine comm server stage, and then have a different err
Electronics Forum | Mon Oct 25 21:42:26 EDT 2021 | astarotf
thanks for the info. But we do not have the installation discs or the software to reinstall the machine. There is no EXM-9 calibration information or BIOS parameters in the document. We have already exchanged the old battery for a new battery on the
Electronics Forum | Wed Feb 01 00:10:32 EST 2006 | kent
Are you seeing this problem with the nozzles after an error stop? Well check station 15 confirm nozzle clutch origin. It will cause this problem. If you rotate a shaft (with the machine stopped) 45 degrees and start you will get return theta off and
| 1 |
