Electronics Forum | Tue Jun 13 12:45:22 EDT 2000 | Peter Field
Help!!! We are using Fuji CP6 machines. The nozzles use those gloss yellow (sort of fluorescent) disks to provide contrast between the component and nozzle for centring. My operators keep damaging the disks causing the machines to need recalibratio
Electronics Forum | Fri Jun 20 23:47:53 EDT 2008 | 1036
We recently bought a used MPM SPM screen printer and the computer does not boot up. I was told that the software got damaged and need to be reinstalled. Unforturnately the backup disks did not come with the machine. Anybody can help me get a copy of
Electronics Forum | Tue Jun 13 14:52:12 EDT 2000 | Jason
Dear Mr. Fields, SMT Parts, USA (San Jose, CA) supplies the light dispertion disk for the CP6 nozzles. Call Mr. David Lombard at 1-831-477-1518 Hope this helps. Jason Robotham Tekmart
Electronics Forum | Thu Jun 15 14:20:21 EDT 2000 | Kevin Simpson
Hi Peter, The Disk you are refering to can be outsourced from several different vendors. The thing to be careful with is getting a consistant colored disk. You don't want to have etc... some dull/bright..etc. We have found one local vendor we use.
Electronics Forum | Mon Jun 19 14:14:12 EDT 2000 | pr
SMTRESEARCH.COM OR WPSALES are also options. There are lots of them out there who will supply just the discs, new nozzles, or do retips on your nozzles (cheaper) and all I've dealt with are cheaper than Fuji. As Kevin says your disc's need to be cons
Electronics Forum | Fri Nov 04 17:50:52 EDT 2016 | ttheis
We have a vip oven with corrupt installation apparently but still have the configuration files. Looking for 1.05e install disks if any one has a copy to fix it. Thanks
Electronics Forum | Fri Nov 04 17:51:31 EDT 2016 | ttheis
I contacted btu but they told me they only have wincon version 2.0 and newer.
Electronics Forum | Fri Jan 05 20:26:48 EST 2024 | kristi
I am in search of a boot disk for an Electrovert Econopak Plus. First our CMOS battery died, we wired a 3V battery to it and that works fine now. However now it's saying the diskette is unable to boot. The disk drive passes test, and I have installed
Electronics Forum | Tue Sep 13 10:40:01 EDT 2011 | kahrpr
Check the drive make sure it is not going bad. Also most newer floppy disks are not very reliable.
Electronics Forum | Sun May 09 09:23:27 EDT 2004 | Sam
Harry, Yes, the model is AP-20 and the computer is 386. I think the system disk was damaged by floppy driver that did not do the maintenance before reading the disk. I have do the test with the common disk that insert to the driver after do maintena
.png)
winsouce.jpg)