Electronics Forum | Mon Aug 23 10:11:55 EDT 2010 | flipit
Hi, I have never been able to find an acceptable dispense process for dispensing small dots of solder paste. I currently have an auger screw automated dispense system and can not accomplish 0.010" dot sizes. In addition, stencil printing is much m
Electronics Forum | Tue Jun 15 19:14:51 EDT 2010 | hegemon
You also need to consider the total metal load in your dispensable paste. You'll need a slightly higher flux content and less metal, say around 87% total metal, in a 4 or 5 mesh size. We had to have some special mixes made in order to do fine pitch
Electronics Forum | Fri Jun 04 16:30:10 EDT 2010 | jdm2008
I am running a cemelot 5000 and I am having trouble with the solder clogging up the needle. When the solder is removed it almost appears if it has reflowed. I am using a 22 guage needle, and the problem occurs with both type 3 and type 5 solder pas
Electronics Forum | Mon Jun 19 09:47:01 EDT 2017 | dleeper
Quad made an auger style dispenser that mounted to the pick and place head. A long time ago, in CM far far away, I tried to add one to a Quad 4C but could never get the damn thing to work. The folks at PPM http://www.goppm.com/ might be able to he
Electronics Forum | Fri Feb 05 02:40:40 EST 2021 | victorzubashev
For components with the large pads, you can also use secondary soldering dispensing. Some printers like DEK have an option to mount a syringe with an auger valve to do dispensing after the printing step process. Obviously will not work if you have to
Electronics Forum | Thu Nov 30 15:18:54 EST 2000 | Rich Z
All, I have a reoccurring issue with the Alpha-Metals WS601, water-soluble paste in that the size 20 nozzle of the auger-type dispenser on my Camalot Gemini II clogs up rather frequently. Every few hours we are having to go in and clear out the nozz
Electronics Forum | Fri Sep 28 18:16:21 EDT 2007 | hegemon
Replacing Screen Printer with a dispensing system? If you have large complex PCBs you will lose a bit of time to say the least. That being said, we have had great success with an I&J Fisnar 'bot with positive displacement (auger) valve for dispensi
Electronics Forum | Sat Jul 03 15:14:25 EDT 2010 | scsi
Hege, can you share more info on the formulation you ended up using for the micro dot dispensing? I'm trying to find the proper metal load and viscosity for the auger valve dispenser that we are developing and it looks like the regular low viscosity
Electronics Forum | Wed Dec 10 07:47:16 EST 2008 | benefon
If you find the correct type of adhesive/needle size then dispensing certainly is no problem. With a footed needle a very repeatable process too. Much more flexible than stencil printing and no need to mess around with stencil cleaning. But with auge
Electronics Forum | Fri Aug 07 09:31:21 EDT 2015 | esoderberg
We use Humiseal T300 latex mask for over 17 years. No smell. That said we have been dispensing several ways. One is a Asymtek 718 in-line machine using a 1 gallon pressure pot and their DV7000 valve. It is an auger valve that has been highly successf
winsouce.jpg)
