Electronics Forum | Tue Nov 05 11:52:48 EST 2019 | rgduval
Richard, Are you trying to put different pcb's on the panel, or just step and repeating the same pcb across the panel? Either way, the method is pretty similar. For step and repeat, you need to create a panel/layout, using the panel fiducials. Th
Electronics Forum | Thu Nov 05 07:54:40 EST 2009 | jeffreyj
gregp - that's the main problem I am having here: there is so little basic information available about these machines. It's almost like the sellers intentionally put as little information as possible in their listings on this site, equipmatching, etc
Electronics Forum | Thu Sep 06 22:34:15 EDT 2001 | davef
The more we talk about this, the more it seems like you should use the process we've discussed to proof your design. Immediately there after, you should use a top-flight high-mix contractor to continue the prototype run for you. If you don't have t
Electronics Forum | Mon Jun 23 11:21:28 EDT 2008 | realchunks
Do you have the track ball style mouse that originaly came with the machine?
Electronics Forum | Thu Jan 23 23:00:42 EST 2014 | davef
I agree with AFlex. Don't tin stranded wire that's assembled into a screw terminal block. I believe the reasoning has to do with avoiding stress on the wire metal caused by different expansion rates of the solder and the wire. BR davef
Electronics Forum | Thu Jun 08 17:35:48 EDT 2017 | zsoden
Thanks for the suggestion, Steve, I'll look into sourcing a test kit here in Oz! I did however talk to the guys doing the touch ups of this batch of boards and they are sceptical that it's nickel: they have had to solder to nickel in the past and rec
Electronics Forum | Wed May 16 07:03:23 EDT 2018 | dekhead
Recommend E;?configuration backup and install from scratch. Upon post-ghost do not reload configuration files, only machine keyfiles
Electronics Forum | Thu Jun 15 08:44:18 EDT 2006 | jdengler
Bert, The original IP feeders do a poor job of peeling the cover tape. Things to check: -All teeth present on the take-up reel -Take-up reel has even drag as it rotates (reel out of round or dirty) -Take-up reel drag is not too high (locations and
Electronics Forum | Wed Jun 25 21:31:42 EDT 2008 | chrisgriffin
Sounds like the mouse driver is in the software, but it is not detecting the mouse. My guess is the mouse or connection. If you do need a driver, I've got some. You can give me a call if you need any help. Chris 918-851-3370
Electronics Forum | Mon May 18 13:37:44 EDT 2009 | thenrz
Hello, Has anyone had luck with getting a GSM 1 machine talking on a windows network? We are looking to do backups every so often. We purchased a 10base-2 to 10base-T converter and it talks to the rj-45 Windows end, but there is no communication
