Electronics Forum | Thu May 13 21:45:14 EDT 1999 | ardis
I am seeing reflow around my signal pins after being subjected to a profile of 204c for 1 minute and 225c for a min of 30 seconds. Signal pins are soldered into a copper plated alum. case with SB5 and then silver plated. The pins have a hot oil tin
Electronics Forum | Tue Jan 08 14:54:10 EST 2002 | Yannick
Hi, I experience some trouble with my solder joint recently. And I'm wondering if someone could help me with this. First I use a thermocouple wich I must tape to the board to profile my temperature. I want to buy the Temprobe from Saunder Tech
Electronics Forum | Thu May 14 15:23:49 EDT 1998 | Matthias Mansfeld
Does anybody know a (if possible low-cost) system which can travel with the PWBs through a reflov oven (like some temperature profile loggers) for measuring the residual oxygen? My problem is, it is a batch oven which does not allow to have any pi
Electronics Forum | Thu Sep 07 10:32:12 EDT 2006 | slthomas
Is the solder reflowing on the pad but not wicking up the lead, or does there appear to be insufficient solder to wet both, or is it not reflowing at all, or.....? Have you verified your profile? What is the condition of your paste (expiration date,
Electronics Forum | Tue Dec 01 14:44:04 EST 1998 | Terry Burnette
| Hi | I have been conducting my first reflow profiles. Most of the texts that I have read suggest soldering the thermocouples to a populated pcb. I am finding this very difficult. I have been using a high melting point (Sn5 / Pb95) solder and the
Electronics Forum | Wed Jan 06 13:24:13 EST 1999 | C.K.
Hi. Does anyone know where one can purchase temperature stickers (the ones that change color) for PCB profiling?
Electronics Forum | Wed Jan 06 13:50:38 EST 1999 | john
| Hi. Does anyone know where one can purchase temperature stickers (the ones that change color) for PCB profiling? |Try Omega. They have quite a variety of shapes, sizes and temps.
Electronics Forum | Wed Jan 06 17:36:06 EST 1999 | Dave F
| Hi. Does anyone know where one can purchase temperature stickers (the ones that change color) for PCB profiling? | C: Try these guys: Tempil, 2901 Hamilton Blvd., SPainfield, NJ 07080 908.757.8300 fax 9273 Dennis Redline TTYL Dave F
Electronics Forum | Fri Jan 08 16:23:25 EST 1999 | Brian Conner
| Hi. Does anyone know where one can purchase temperature stickers (the ones that change color) for PCB profiling? | Check out Electrovert, their sticker has a range of 6 temperatures per sticker. They are of excellent quality and reliability.
Electronics Forum | Wed Jun 18 10:42:07 EDT 2003 | caldon
Frank- Dreamsniper touched on something I totally forgot about....DROSS.....This is a subtle way for $$$$ to be lost. If it is silver and Shiney...it does not belong in the dross recycle bin. That is good Solder being tossed. You can also add into
