Electronics Forum | Wed Mar 13 17:17:42 EDT 2013 | isd_jwendell
I don't know your machine, but on mine the interlock is the large access door. It's done so that you cannot open the cover while running, but it also checks for a closed door at startup due to head homing sequence. Yours may be similar in that it won
Electronics Forum | Fri Jul 17 19:43:20 EDT 2009 | fujiphil
Have you eliminated the hardware N.G.? Check the connection for the rear door. If the connection are ok, try to bypass the key. short the two wires for the rear door. If the rear door problem is corrected, check the rear door switch physically. Reg
Electronics Forum | Thu Aug 29 14:20:17 EDT 2013 | nophsem
Thanks for the response bobpan! LED's on the driver cards work well (green with doors closed and both red&green on with door open), and I don't use the carts. The head doesn't move after power on and inmediately you can listen alarm.
Electronics Forum | Thu Jun 26 05:07:19 EDT 2014 | bobpan
On the older machines if the z-axis has springs on them sometimes they get weak and when you open the door the z will not stay up. Before closing the door manually push the z up if they are dropping down then enable the motor power. If this is the ca
Electronics Forum | Wed Sep 02 14:58:35 EDT 2015 | derrikf
Steve, Does said phenomena occur at a particular time? Or is it seemingly random? What sensors are you referring to? The door sensors, (as in you have the doors open and the gantries move)?
Electronics Forum | Mon Jan 13 11:29:39 EST 2020 | rlising
We are planning on installing an SMT Line in our building. We own 75% of the building, there is a crossfit gym next door and they tend to drop weights where we can feel the vibration. Should we be concerned with the SMT Line being set up on that end
Electronics Forum | Fri Dec 17 13:23:15 EST 1999 | Chris
I have an underfill material which takes 6 hours to cure. It works great, better than any other underfill I have ever used. A vertical cure oven is too expensive. I am currently using batch style ovens and opening the oven door as additional produ
Electronics Forum | Fri Apr 05 01:59:17 EST 2002 | darby
You got me dander up now. Anything gettin' out the door there?
Electronics Forum | Wed Mar 13 19:48:31 EDT 2013 | marcelorotofrance
The front door has as security switch, indeed. It works ok. A lever switch for override the door switch is also included from factory. (It don´t look good from the safety point of view but, you know). There is also a presostatic switch on the air reg
Electronics Forum | Wed Feb 28 16:46:08 EST 2007 | jmelson
Philips is out of this business. They spun off the SMT business as Assembleon America. Their site is partially closed, and I don't know what hoops you have to jump through to become a member. The open part of their site gives no result when you se
