Electronics Forum | Tue Jun 14 17:32:44 EDT 2011 | davef
It depends on the flux and the down-stream processing ... * If there is adequate down-stream cleaning: We are ambivalent. * If the flux is low residue and there in no down-stream cleaning: We don't like using a syringe because it squirts liquid flux
Electronics Forum | Thu Sep 02 20:41:03 EDT 2010 | mmccance
SME, Thanks for your response, but I have already checked out 1 & 2 on the downstream conveyor, and they are sending the machine ready signal. I know that the loader is recieving it because when the downstream conveyor is not busy the loader attemp
Electronics Forum | Fri Jul 08 13:43:20 EDT 2005 | pjc
I sell in-line ATE/ICT systems. They are designed to identify passed or failed boards coming off the tester(s). You can do so with a 90 deg. diverter and an extra magazine loader. The ICT machine knows which has passed and which has failed, so it com
Electronics Forum | Mon Jun 10 10:12:42 EDT 2019 | assuredtech
What is the year, make and model of your oven? Are you running it with Upstream and Downstream (pre-reflow, post-reflow) conveyors? Is the qty of the product low, medium or high? What is the max process width of the oven? what is the max board with o
Electronics Forum | Fri Aug 30 16:47:56 EDT 2002 | davef
Ooops, sorry Peter. [Those pesky decimal points.] I meant to say �150-200 thou�. There is a fair amount of 'Kentucky Windage' in this due to: * Height of the component and the down-stream spacing. * Chip wave capabilities.
Electronics Forum | Sat Jan 17 07:25:18 EST 2004 | Andreas
I need to connect a Universal HSP (SMPI, Upstream) with a SMEMA interfact (downstream). Can anyone give me some information about the SMPI interface? Or does anyone have a schematic of a conversion box from SMPI to SMEMA? Thank you! B.R. Andreas
Electronics Forum | Mon Dec 06 21:41:13 EST 2004 | pdeuel
I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long
Electronics Forum | Tue Jun 19 11:49:07 EDT 2007 | pfedorys
At Gerberdata.com we use CAM350 from Downstream Technologies to translate gerber files for both SMT and Test fixtures. We also use CAM350 for Reverse Engineering Gerber files into a complete CAD database. Visit our website for more information. -Pau
Electronics Forum | Fri Feb 10 08:47:45 EST 2006 | davef
Centroids from the Gerber data * Graphicode GC-Place graphicode.com * Downstream Technologies CAM350 downstreamtech.com * Gerbcam Tecnomatix-Unicam unicam.com * Circuit Cam aiscorp.com * GerbTool GerbTool.com
Electronics Forum | Mon Jan 08 10:39:23 EST 2007 | bobruz
Hi everyone! I need several Upstream & Downstream SMEMA Interface cables for the line I'm pulling together. Can anyone advise me on where to buy some pre-made cables or do I have to do them all myself? Thanx, bobruz rruszanowski@moog.com
.gif)
.gif)
