Electronics Forum | Fri Dec 31 12:26:29 EST 2010 | kvael
Has any one had this problem? Dynatech says it is the I/O Dpram board, sold me one that dosen't work. Bought a second Dpram from SMTBOX, still have the same original problem. During Dpram initialization error comes up "no command response from handl
Electronics Forum | Tue Jul 24 15:36:24 EDT 2018 | empac
Were you able to fix the problem ? Regards, David
Electronics Forum | Fri Jan 12 03:52:06 EST 2018 | kimseo
Hello dear, we have own SAMSUNG CP40CV pick and place machine. Today I had to change a battery in PC mainboard. It didn't work immediately. I had to open BIOS and load DEFAULT SETTINGS. Now I can start a computer but after Windows is started it will
Electronics Forum | Mon Aug 31 15:39:18 EDT 2020 | jmelson
Yes, the rightmost VME board is the IO_DPRAM, and it also handles the front panel buttons and E-stop inputs to the computer(s). So, reseat the connectors on the front of that board. Also, there may be an interface board on the bottom left (called C
Electronics Forum | Mon Dec 07 11:33:25 EST 2020 | ecogroup
Getting these errors: No command response from handler (0x1000) .... DpBlockWriteL: TimeOutWait for ACK .... Loading SYSTEM data to DPRAM is failed ..... Failed to create empty document ..... No command response from handler (0xffff) ..... Faile
Electronics Forum | Mon Dec 13 11:27:39 EST 2010 | kvael
I have a Samsung CP30V machine that when starting up gives me the error "NO COMMAND RESPONSE FROM HANDLER". Has anyone had this problem. I have replaced the I/O Dpram board, no change.
Electronics Forum | Wed Aug 26 07:24:29 EDT 2020 | sarason
Have you tried this solution https://www.ebay.co.uk/itm/SAMSUNG-CP30-VME-10-DPRAM-REV-001-03-I-O-BOARD/173217871888 sarason
Electronics Forum | Tue Jan 19 08:33:47 EST 2021 | ecogroup
Changed out the front I/F board, contactors engaged & G9D-301 works.
Electronics Forum | Tue Mar 27 06:59:58 EDT 2012 | JB
We have an issue with our Samsung Pick & Place. It comes up with errors. No sequence-finished from handler (%1) Loading SYSTEM data to DPRAM is failed Failed to create empty document No command response from handler. (0xffff) We have tried swap
Electronics Forum | Tue Mar 27 15:49:54 EDT 2012 | bradlanger
Try Re-seating the card that connects the ISA slot from the computer mother board to the I/O Dpram card. It may be worth checking the ISA card for bad solder joints. The computer mother board could be going bad. Check for vented electrolytic caps. Ho
