Electronics Forum | Tue Jan 26 13:47:26 EST 2010 | swag
In addition to what Jeff wrote (I agree 100%) I would advise installing new theta drive belts on both heads. We had the same error at one time; if I remember right, I was told the new belts are better mat'l. It's likely your old ones are worn.
Electronics Forum | Wed Feb 23 15:19:49 EST 2005 | Dilbert
I don't work on quads but I can give you some things to look for... Each of the moving axis work off a motor that is controlled by a "drive". Some of these drives have a fault or error output that is connected to the motion controller. One of your
Electronics Forum | Fri Dec 01 09:29:36 EST 2017 | kojotssss
Hello. We have a problem with QFN type. Component is elevated. Stencils are reduced. Vias is without holes. What are the solutions to fix the fault. Look at the photo. Attachment: https://drive.google.com/open?id=1OIgaXUz2yoKP3fWZg2rUsrmZMBWidk6_
Electronics Forum | Mon Jun 13 11:48:33 EDT 2005 | CMiller
We got a F04 error (internal Memory fault) on the shared drive and entered 8 in location N001 as per the maint manual and cycled the power. I then set all the locations listed in the manual to thier default settings. Now the motors do not run to thei
Electronics Forum | Thu Apr 15 11:14:34 EDT 2004 | mikecollier
Our conformal coat area has recently requested changes to our bare board houses to perform a pumice scrub operation on the PWB prior to HASL plating and delivery to us. Our first lot received caused us to have void faults under multiple component ty
Electronics Forum | Mon May 19 14:29:27 EDT 2014 | wendynguyen234
We have a Samsung CP20 with window 95, S-2000 MMI version 1.27 from Manncorp Inc. that freeze on window 95 screen. It was found that the mother board was at fault & need to be replaced. We replaced it with a compatible one & kept the original hard dr
Electronics Forum | Thu Aug 08 11:04:48 EDT 2019 | btfonseca
Hi everyone, I was recently trying to troubleshoot a bad floppy driver on our QSV-1, which actually worked, I was able to read floppy drives but for some reason it all went downhill when one of the green LED's turned off and another red LED turned on
Electronics Forum | Thu Mar 14 13:31:10 EDT 2013 | sarason
I don't know your oven but I have dealt with high temperature ovens/furnaces before. These would be my thoughts. Change in the resistivity of the heating element due to aging. Blockage of air flow in the oven by buildup of soot/ debris in either th
Electronics Forum | Thu Feb 12 13:01:12 EST 2004 | patthemack
Thanks for your response. This is a DeHaart MPC-29. It has manual vision, no conveyor. When I bought it, only one camera was working. I fixed that, but while I was jacking with that, the electronic pressure regulator (spcjr) burned up without warning
Electronics Forum | Thu May 12 04:37:30 EDT 2005 | Rob
1) Only if it's a real enhancement, and not to fix a fault in your design. 2) No, it just has to be instinctive & accurate. 3) Barcode is fine by me, but others swear by data matrix 4) Better than 1 in 10,000 - which could be once every 5 boards.
.gif)
