Electronics Forum | Fri Apr 21 17:34:04 EDT 2006 | kmorris
Has anyone tried this MS2 molten solder surfactant? http://pkaymetal.com/dross.php4 I'd be interested to know your thoughts/concerns. Thank you; Kelly
Electronics Forum | Mon Jun 12 22:35:57 EDT 2000 | Suan
Is there any tablets to reducce Dross Produced by the chemical reaction of the solder pot.If there is ,please recommend and to what extent is the % reduction do we expected to see. thank you Panas
Electronics Forum | Wed Oct 19 11:33:15 EDT 2011 | caerleon
easier if you recycled on-site? You can still send off for reclaimation the oxide powder that your left at the end of the process. Failing that talk to your supplier to see if they have arrangements to do this for you or look at reducing dross - i f
Electronics Forum | Tue Jun 13 22:00:10 EDT 2000 | Dave F
Suan: I'll take the "easy half" of your question I suspect you�re talking about Kleenox. It is a powder that you can sprinkle on your dross bed. Several points are: � Kleenox does not reduce dross. It reduces the amount of solder entrapped in dr
Electronics Forum | Mon Dec 28 10:36:25 EST 1998 | Brian Conner
We are looking into a SRS machine, and one question keeps coming up, "If we pull out all the solder, will the recycling company refuse to purchase the remaining dross?" Anyone who out there that uses a SRS machine(Solder Recovery System) I would app
Electronics Forum | Thu Oct 23 09:49:18 EDT 2008 | davef
We're not sure the specifics that BLT Circuit Services Ltd referenced, but many companies use dross reducing agents in their wave solder pots. Among dross reducing agent suppliers: * Fry [4100 Sixth Ave, Altoona, PA 16602; 814-946-1611 F814-944-8094
Electronics Forum | Thu Apr 15 09:34:00 EDT 2010 | sudhir14
Hi, Can any one help me for how to reduce the dross formation in wave soldeing process , currently we are getting very heavy dross formation in process
Electronics Forum | Thu Apr 15 10:09:55 EDT 2010 | davef
Dross formation rates for SnCu and SAC are roughly 2.5 times the rate for SnPb (Hwang et al., 2004) Methods for reducing dross are: * Lower pot temperature * Run pump speed slower and only when soldering * Check solder contaminants to BS219, ASTM
Electronics Forum | Mon Apr 19 14:27:16 EDT 2010 | davef
Ralph Woodgate says that pump speed is the biggest driver to dross production
Electronics Forum | Thu Apr 22 09:39:08 EDT 2010 | baildl632
Davef, who is Ralph Woodgate?
