Electronics Forum | Thu May 26 18:19:01 EDT 2005 | darby
You should be able to export this data from each machine into an ascii format. Import into Excel and do what you want with it. I don't see that you should have to pay for any software at all. If you are not familiar with Excel and macros etc then get
Electronics Forum | Fri Jun 10 18:44:28 EDT 2005 | Frank
This depends on how the software of your particular machine was written (designed) to handle local fids. Most machines do not have a requirement about the position of the local fids. The purpose of local fids are the same as global fids. All the p
Electronics Forum | Thu Jun 16 18:16:32 EDT 2005 | davef
Josh: You're correct it's tough to describe the layout of the BGA pads and traces. We wouldn't be too excited about seeing this board either. On one hand, for the obvious lack of care taken in doing the layout, this is a junk board and you shouldn
Electronics Forum | Thu Jun 23 05:51:32 EDT 2005 | Paul
Hi Folks, just wondering if anyone else agrees that Rheometric pumps do not work and are more trouble than they're worth. They do not circulate the solder paste properly. The only solder paste that is processed on a FIFO basis is the materia
Electronics Forum | Thu Sep 01 00:52:24 EDT 2005 | adlsmt
Depending on the connector you should be able to use a standard cheap arbor press with some cheap home-made tooling. Standard arbor presses typically have a rotating disc with cut-outs, remove this and put a decent quality stainless steel block in it
Electronics Forum | Fri Sep 23 03:11:31 EDT 2005 | Base
Hi All, I think you're adressing this issue from the wrong angle: What I'm reading is an equipment vendor who has an idea about what the best way of working is (replace entire feeders), and a (potential) customer who thinks otherwise (splicing). The
Electronics Forum | Fri Oct 07 14:37:36 EDT 2005 | jimmyjames
Could I get some help please? I have a Heller 1700EXL, 7 zone oven and I'm trying to figure out a better way of off-loading my completed boards. What I have now is simply a small table at the exit of the oven with about an 8" drop from the top of
Electronics Forum | Thu Oct 13 15:41:30 EDT 2005 | lyrtech
Hi, We have a customer who give us a 20K board contract each year. It's only thru-hole components.The baord is HASL plated. So we pass it into our wave. No problems. Recently, our customer decided to go into GOLD PLATED finish. We take the same re
Electronics Forum | Mon Oct 31 12:03:49 EST 2005 | vickt
Rob..... First off...Sorry if you have had an issue in the past, but please know that not every customer has your opinion about our legacy software. UIC's policy is not to charge for s/w "fixes" for at least the first year from initial purchase. We f
Electronics Forum | Mon Oct 31 14:57:30 EST 2005 | gregp
Hello Rob, So glad you thought of me... Contact Systems policy is--and always has been--free software upgrades for the life of the machine. We do not differentiate betweeen "bug" fixes and added features. Each release is a combination of the two al