Electronics Forum | Fri Apr 01 07:38:52 EST 2005 | bobpan
The machine has 2 25 pin cables that are supplied with it and you have to have adapters that plug into them for smema or siemens. The cables are x20 and x21 smema pigtails.
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Thu Apr 04 16:38:51 EST 2002 | davef
Equipment companies like to talk about �accuracy� and �repeatability�. These measures provide limited information. Flaws of the measure aside, some printer companies have begun to report Cp. * DEK ELA: Cp = 1.33 @ �0.025mm * DEK 265: Cp = 1.6 @ �0.0
Electronics Forum | Thu Apr 09 15:22:36 EDT 2020 | tbst
Hello, You can also use SD 218 -40 from HEP This is the Part who EKRA Company used After EOL from the HF The EKRA-Part.Nr. Is 5340000133 Its to use for 2x T8 , 18 , 25 36 W Or if you find Dome Times EKRA has used Quicktronic del Luxe HF36 for 2x 36
Electronics Forum | Wed Jul 19 10:58:17 EDT 2006 | slthomas
Having never used either DEK or MPM I can't comment on the "big 2" but you might want to include EKRA in your long list. We had a couple of E5's at my last employer and loved them.
Electronics Forum | Mon Jan 04 15:57:38 EST 2021 | bobpan
I believe there are 2 computers in the machine. If i remember correctly its possible the other computer is stuck on something and its stopping it from booting up. Try to plug a monitor into it and maybe you will see an error.
Electronics Forum | Mon Jan 01 06:44:03 EST 2024 | micropak
We have an EKRA E5 and there's a E5 System Manual PDF available. I am not sure if it is a proper service manual, but it has electrical drawings. If you need, kindly send me an email. Happy New Year
Electronics Forum | Tue Jan 05 07:01:37 EST 2021 | djwave
Hello, thanks for your replys. Our EKRA E5 only boots and use the front computer (old PC with MSDOS and software), the rear one always is off, dont start when i switch machine power, dont know if is required for operate the EKRA. We turned on the EK
