Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Fri Apr 02 14:11:21 EDT 2010 | bigdaddysoy9
Manjunath, I prefer orthogonal systems. In my experience they are actually better at detecting coplanarity and HIP defects than multi camera systems. They are obviously limited, in that they can not inspect a component under another component, b
Electronics Forum | Mon Nov 21 23:54:02 EST 2022 | omar08
Hi all, I have a problem with the OFC camera (V12). I changed this head and the problem is not solved. I'm hoping to temporarily disable this option in the accessory software, so I can do this?
Electronics Forum | Tue May 02 19:29:33 EDT 2006 | bobpan
Why would any machine have a problem with a .050 fiducial? I have used meridian's and not had any problems finding fids.
Electronics Forum | Mon Apr 24 03:39:42 EDT 2017 | bukas
hello everyone, i'm experiencing some problems with Samsung CP45FV NEO fiducial camera. image is running trough display(something like when you look display trough phone camera, but runs horizontally) and it has offset. the problem is that offset ch
Electronics Forum | Tue May 02 18:13:44 EDT 2006 | jsloot
I have read through some archives on fiducials and see that there are a lot of people having problems with a .050 circle. One suggestion for a remedy was using a filter on the camera. Anybody else using this remedy? I would like to know more about th
Electronics Forum | Mon May 31 11:08:28 EDT 2010 | padawanlinuxero
Hello I am having problems with the hydra camera, I start getting an error message saying that the camera couldnt look at the fiducials on the hydra, I went to the camera in service and turn it on to see the problem but I found out that the real pr
Electronics Forum | Fri Mar 05 12:24:34 EST 2021 | astarotf
Hello Our problem was the camera that was bad, we replaced it and it worked again, greetings!
