Electronics Forum | Tue Nov 29 01:11:34 EST 2005 | ajay
I am looking for purchase of EKRA E4 spare from nor EKRA agent. part detail - BELT 80222B-20 L=1835MM 5011000002 Any contact pl. confirm. ajay
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Wed Aug 11 07:21:20 EDT 2021 | korrapat905
Hi friend I have one EKRA-E1 down cause by show "Referencing progress" too long. Who can advise me to check and trouble shooting. Thank, KP
Electronics Forum | Tue Dec 14 20:17:50 EST 2010 | sfsurama
I would be glad if someone could provide me the manual for Ekra E1/E2 screenprinter.. thank you
Electronics Forum | Thu Nov 17 08:01:22 EST 2005 | dismon
I'm thinking about purchasing a new screen printer, and I have to choose between Ekra E1 and Dek 248. Could anyone help me? Which one is better? Which are pros an cons of them? Thank you
Electronics Forum | Sun Nov 01 10:07:08 EST 2009 | cuperpeter
Hi, Does anyone have english manual for a EKRA E1 screen printers? I would be glad if somebody has one. Thanks, Peter.
Electronics Forum | Wed Nov 14 14:33:07 EST 2018 | pharasyn
We have an EKRA E-1 screen printer that operate with no problems for several months, then all of a sudden it will spend hours or days on the "referencing in progress" message. It's currently been stuck on this message for about 30 hours. Any ideas wh
Electronics Forum | Mon Nov 23 10:19:28 EST 2009 | john123
Your welcome. The E1 is a nice printer for semi-automatic.
winsouce.jpg)
