Electronics Forum | Wed Oct 07 06:22:23 EDT 1998 | Charles Stringer
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin
Electronics Forum | Tue Dec 08 08:52:42 EST 2009 | cunningham
How do people prepare there solder paste for screen print? We currently remove them from the fridge and mix them in a 500g solder paste tub mixer to mix the flux and paste together we waste to much paste at the moment as we only use the tub for 1
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Thu Apr 29 16:58:00 EDT 2004 | pjc
You should be able to get a one-print Mylar frame for the SMTech 90 machine from SigmaPrint, http://www.sigmaprint.co.uk Yes, with vision you store images of two features such as solder lands or fidicial marks from opposite corners of the board. With
Electronics Forum | Mon Apr 26 08:15:37 EDT 2004 | pjc
MPM uses a one-print-Mylar system, as do other printer mfrs. In this system there is a Mylar sheet attached to a frame that is secured over the printer table with the board on it. You print onto the Mylar. The table X-Y-theta manual adjustments are u
Electronics Forum | Fri Mar 29 10:11:02 EDT 2019 | cyber_wolf
“For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of
Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Wed Sep 07 03:03:35 EDT 2005 | Milroy
I am engaged with SMT production and we are going to have a brand new SMT line and I am studing about the screen printing and I have seen most commonly used stencil thickness is 6mil and I need to know what is the best solder paste height we can achi
Electronics Forum | Fri Apr 04 08:49:45 EDT 2008 | ck_the_flip
Define "expired" though... 1 week? 6 weeks? 1 month? 6 months? Unrefrigerated life is generally 30 days. If paste has been stored refrigerated at manufacturer recommended temperatures, what would you guys do, like say, if you owned your own shop
Electronics Forum | Wed Feb 11 14:10:55 EST 2015 | mbartel
Any one screen printer manufacture stand out over others? We are also 100% lead free, I use Kester solder paste. Is this a good brand compared to other brands?
