Electronics Forum | Wed Jun 13 19:25:00 EDT 2018 | chavez
I HAD THAT SAME PROBLEM. I TRIED TO FIND THE PAPER ON HOW TO CHANGE TO ENGLISH. i COULD NOT LOCATE IT. CONTACT Galena, Evita ABD SHE WILL BE ABLE TO HELP.
Electronics Forum | Wed Jul 04 03:59:10 EDT 2018 | oxygensmd
I had similar problem before. I cleaned the PCs (both machine and station) and replaced the cooling paste on the CPU cooler. After time the Control was able to shut off - before the issue solved, we used the safety knob to cut the Control.
Electronics Forum | Wed Jul 04 04:04:19 EDT 2018 | oxygensmd
One more thing. We had a card defect during the control had this problem, on of TBF card burned out. But I think you need to check the thermal paste in the PC - clean the cooler and the filter first.
Electronics Forum | Mon Aug 13 05:03:48 EDT 2018 | oxygensmd
Hi. As you asked me in e-mail, I sent the E4-E5 manuals. I hope that it helps to learn the new software.
Electronics Forum | Thu Nov 14 19:12:45 EST 2019 | bobpan
Sorry .....thought E1 was same as E4 and E5. Looks like they have different systems. Good luck.
Electronics Forum | Fri Nov 23 11:42:32 EST 2018 | dalsenkenneth
Hmm, I think I've heard that from my cousin before. I'll just ask him real quick.
Electronics Forum | Wed Dec 05 02:17:41 EST 2018 | oxygensmd
Hey there, Can you take a photo about your machine? For example my machine has a stencil-like blade only.
Electronics Forum | Mon Jul 29 10:04:08 EDT 2019 | griinder
I believe the x20 and x21 ports are used for smema. There is a proprietary smema end, that connects to those cables. They almost look like parallel port connectors right?
Electronics Forum | Mon Jul 29 10:21:38 EDT 2019 | aharper
Yes, they look like parallel port connectors. I traced the lines and I believe you are right about the SMEMA. Thanks for your input
Electronics Forum | Mon Jan 04 14:57:14 EST 2021 | aharper
I have found that doing a hard restart of the machine usually clears up the error. Aside from that, I have no insight into what is actually causing the error.