Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Tue Oct 01 11:48:01 EDT 2013 | bengt
Hi All. We have bought EKRA E4 screenprinter. We are running R to L and printer has L to R direction. Does anyone can help me on this ? On specs it says all kind of directions.
Electronics Forum | Sun Oct 06 12:18:03 EDT 2013 | christian01976
Hello! Go on the Service Button (bottom right) password could be 2211 or 9060. In that menu you should be able to change direction. Please tell me if it works! Bye Christian
Electronics Forum | Fri Jan 24 06:36:42 EST 2014 | cbeneat
For operator, try 4530. To change the password, I think it's done in the password INI file.
Electronics Forum | Thu Jan 23 15:57:58 EST 2014 | bestglobalsmt
Hello! > > Go on the Service Button (bottom right) > password could be 2211 or 9060. In that menu you > should be able to change direction. > > Please > tell me if it works! > > Bye > > Christian christian - do you have any idea where the op
Electronics Forum | Thu Jan 05 03:58:19 EST 2017 | rafaelnagares
Hello, I am having problem with the width of the conveyor and I suspect I need to calibrate this function. Do anyone have a Service manual? I have the operator and main software manual, but not service manual. Thanks a lot friends.
Electronics Forum | Mon Jan 01 06:44:03 EST 2024 | micropak
We have an EKRA E5 and there's a E5 System Manual PDF available. I am not sure if it is a proper service manual, but it has electrical drawings. If you need, kindly send me an email. Happy New Year
Electronics Forum | Tue Jan 05 07:01:37 EST 2021 | djwave
Hello, thanks for your replys. Our EKRA E5 only boots and use the front computer (old PC with MSDOS and software), the rear one always is off, dont start when i switch machine power, dont know if is required for operate the EKRA. We turned on the EK