Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Fri Nov 05 07:14:04 EDT 2021 | oxygensmd
The question is that what do you want? An automatic/semi-automatic machine or a hand-prototyping printer? Using metal-sheet or complete (framed) stencil? Manual printing: For example, Eurocircuit's eC-stencil is pretty nice or there are cheap hand-s
Electronics Forum | Fri Jun 29 03:49:26 EDT 2018 | seri09
Hi.i'm working with a screen printer EKRA E5 from 2001 and i have a problem with it. When i start the machine,the control option gets activated by itself and the CPU usage spikes to 100%. The machine works fine,but the problem is that i cannot turn o
Electronics Forum | Wed Jul 04 03:59:10 EDT 2018 | oxygensmd
I had similar problem before. I cleaned the PCs (both machine and station) and replaced the cooling paste on the CPU cooler. After time the Control was able to shut off - before the issue solved, we used the safety knob to cut the Control.
Electronics Forum | Wed Jul 04 04:04:19 EDT 2018 | oxygensmd
One more thing. We had a card defect during the control had this problem, on of TBF card burned out. But I think you need to check the thermal paste in the PC - clean the cooler and the filter first.
Electronics Forum | Wed Jul 16 11:30:32 EDT 2008 | slthomas
I *think* an E5 takes a 29"x29" frame and you might be able to find one in that price range. The trouble is just finding one. Ekra America will probably have refurbs but the price will no doubt be higher from them.
Electronics Forum | Fri Nov 11 10:58:11 EST 2011 | cpcompany
Hello Sir. I am now looking for some operational manual for Juki,MPM and Heller equipments urgently. If you can provide a manual in PDF file, then please help me out. 1.MPM UP3000 screen printer 2.JUKI KE750 / KE760 pick and placer 3.Heller 1707EX
Electronics Forum | Mon Mar 04 07:44:57 EST 2019 | vrasak
Hello, My EKRA X5 printer does not clamp the PCB. I would like to the manual any E4, E5 or X5. Hope hopefully it should give me some clue. Could you please send me the manual E4, E5 or X5? vrasak@cncroom.com Thank you so much, Weerasak.
Electronics Forum | Mon Jan 01 06:44:03 EST 2024 | micropak
We have an EKRA E5 and there's a E5 System Manual PDF available. I am not sure if it is a proper service manual, but it has electrical drawings. If you need, kindly send me an email. Happy New Year
Electronics Forum | Sat Dec 19 04:23:23 EST 2020 | 712116
Hello Ushir, Could you please send me a copy of the manual. EKRA E5 model Service Manual PDF email address is tct7989@gmail.com. Thank you sir.
