Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Wed Jul 04 04:04:19 EDT 2018 | oxygensmd
One more thing. We had a card defect during the control had this problem, on of TBF card burned out. But I think you need to check the thermal paste in the PC - clean the cooler and the filter first.
Electronics Forum | Fri Jun 29 03:49:26 EDT 2018 | seri09
Hi.i'm working with a screen printer EKRA E5 from 2001 and i have a problem with it. When i start the machine,the control option gets activated by itself and the CPU usage spikes to 100%. The machine works fine,but the problem is that i cannot turn o
Electronics Forum | Wed Jul 04 03:59:10 EDT 2018 | oxygensmd
I had similar problem before. I cleaned the PCs (both machine and station) and replaced the cooling paste on the CPU cooler. After time the Control was able to shut off - before the issue solved, we used the safety knob to cut the Control.
Electronics Forum | Wed Jul 16 11:30:32 EDT 2008 | slthomas
I *think* an E5 takes a 29"x29" frame and you might be able to find one in that price range. The trouble is just finding one. Ekra America will probably have refurbs but the price will no doubt be higher from them.
Electronics Forum | Wed Jul 06 07:33:08 EDT 2016 | enovak
looking for tensions rollers for wiper paper for 2000 vintage EKRA E5 screen printer
Electronics Forum | Wed Nov 17 06:52:18 EST 2021 | oxygensmd
We are using the following passwords on our E5/X5 printers. I read them from password file (pwd001.ini and pwd002.ini). Service: 9060 Supervisor: 4422 Engineer (programmer): 4530 Operator: 1234 Service: 2211
Electronics Forum | Thu Dec 04 00:15:57 EST 2003 | masr
I think Ekra is a good option, is very easy machine to use and is not over saturated of wires, joint cards, servo cards, and so forth, very simple for diagnostics!
Electronics Forum | Wed Feb 03 09:34:43 EST 2016 | oxygensmd
He everyone, We have an Ekra E5 screen printer which is really nice machine I think. Now I'm looking forward a new squeegees set. I don't know the E-series and the X-series can use both squeegees? Are the squeegee holder the same on this two machin
Electronics Forum | Wed May 25 10:51:35 EDT 2022 | oxygensmd
We are using EKRA E5 and X5. Both of them are rock-solid and easy-to-use machines. Software of these EKRAs are really user-friendly. If you make the yearly maintenance and preventive maintenance they will work for years. I know a factory where are ar
