Electronics Forum | Thu Mar 31 19:25:20 EST 2005 | bobpan
got it.....thanks ekra users for the reply's.......hahahaha
Electronics Forum | Fri Apr 01 07:31:48 EST 2005 | jax
I have X5's and we run standard SMEMA.
Electronics Forum | Tue Mar 29 13:14:28 EST 2005 | bobpan
Anyone familiar with making smema work on the ekra x5. I believe is was manufactured with a siemens (not smema)setup. We found the cables to make the siemens work but i am not sure if i can short a couple of inputs on the cable to make the smema func
Electronics Forum | Fri Apr 01 07:38:52 EST 2005 | bobpan
The machine has 2 25 pin cables that are supplied with it and you have to have adapters that plug into them for smema or siemens. The cables are x20 and x21 smema pigtails.
Electronics Forum | Wed Mar 30 14:56:13 EDT 2016 | jsouth
We bought an ekra x5 at auction and the hard drive was pulled (due to the classified nature of the boards the company was producing)... i was told if i could find some one willing to make a clone of their hard drive (we are willing to supply the hard
Electronics Forum | Sat Apr 09 00:37:42 EDT 2016 | smtsparescn
Are you sure it can work even somebody do clone the software and copy to you, Normally it isn't like adding a patch to windows of a pc,
Electronics Forum | Tue Nov 29 01:11:34 EST 2005 | ajay
I am looking for purchase of EKRA E4 spare from nor EKRA agent. part detail - BELT 80222B-20 L=1835MM 5011000002 Any contact pl. confirm. ajay
Electronics Forum | Tue Nov 29 06:23:44 EST 2005 | stefwitt
Very likely this is a Brecoflex belt: http://www.brecoflex.com/
Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
