Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Wed Mar 30 11:59:56 EDT 2016 | cbeneat
Our company has 8 EKRA X5-X5 Pro's we do not use that function on any. Personal preference I guess. I assume the cartridges are set up like the pneumatic gun type dispensers, drop in a cartridge and go. Not in Europe, sorry no knowledge of where t
Electronics Forum | Thu Mar 31 12:25:53 EDT 2016 | nicole0506
Thank you Chris!
Electronics Forum | Tue Mar 29 13:58:52 EDT 2016 | nicole0506
Hello! My name is Nicole and I'm new here :-) I hope you could help me...we recently bought an Ekra X5, and I was informed that it could dispense paste on the stencil on her own, using a cartridge that is placed near the squeegees. Can anyone tell me
Electronics Forum | Wed Jul 19 10:58:17 EDT 2006 | slthomas
Having never used either DEK or MPM I can't comment on the "big 2" but you might want to include EKRA in your long list. We had a couple of E5's at my last employer and loved them.
Electronics Forum | Fri Nov 08 14:48:58 EST 2002 | davef
Yours is (12 thou x12 thou)/(2x(12 thou +12 thou)x5 thou) = 0.60 * Aspect=W/T for electroformed stencils SB GT 1.1 => Yours is 12 thou/5 thou = 2.40 So, we kind of think of what you�re trying do as maybe printing a 16 pitch QFP, which gives you simi
Electronics Forum | Mon Aug 03 07:14:38 EDT 2020 | bangir
Hi, How to adjust the table height of Screen Printing EKRA X5? Could you share me the Manual System Operation?
Electronics Forum | Wed Aug 05 07:38:17 EDT 2020 | bangir
Hi Cris, Yes, The PCB thickness is 1mm. the PCB position below the rail thickness when the table go up the print position. Please advice or do you the service manual book.
Electronics Forum | Wed May 25 10:51:35 EDT 2022 | oxygensmd
We are using EKRA E5 and X5. Both of them are rock-solid and easy-to-use machines. Software of these EKRAs are really user-friendly. If you make the yearly maintenance and preventive maintenance they will work for years. I know a factory where are ar
Electronics Forum | Sat Feb 26 18:37:21 EST 2022 | oxygensmd
I am using SiPlace S20 and F4 machines. Both of them handle 0402 without problem. A newer machine, like S23 or S25HM is way better and accurate, S27HM can place smaller parts too. We are using EKRA E5 (2000) which can print this size without issues.
