Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Sat Apr 09 00:37:42 EDT 2016 | smtsparescn
Are you sure it can work even somebody do clone the software and copy to you, Normally it isn't like adding a patch to windows of a pc,
Electronics Forum | Wed Mar 30 14:56:13 EDT 2016 | jsouth
We bought an ekra x5 at auction and the hard drive was pulled (due to the classified nature of the boards the company was producing)... i was told if i could find some one willing to make a clone of their hard drive (we are willing to supply the hard
Electronics Forum | Tue Aug 09 14:35:32 EDT 2011 | RAM324
friendly software, easy calibration and easy to work with. CONS: spareparts in germany
Electronics Forum | Thu Mar 30 10:54:48 EDT 2017 | emeto
If you use the calibration plate and stencil, that should fix the problem. I think that you are not saving the result from the calibration test. Double check manuals and probably with DEK technician, but it sounds like you are missing a step.
Electronics Forum | Thu Mar 30 10:02:03 EDT 2017 | Bestglobal SMT
We have a 2008 DEK horizon 03i this machine has been a very reliable system. we are having an issue with the print being offset in the x .2mm I have run 4 different boards - same issue on all. same offset. i can print the board 10 times over and
Electronics Forum | Thu Apr 01 18:13:19 EDT 2010 | dman97
Since my last post, I have successfully calibrated my printer. Now I have noticed that after a print, the machine decides to check for fiducials again. A post print fiducial check. Do you know how to disable this? It is slowing down my process co
Electronics Forum | Tue Jun 29 13:42:20 EDT 2004 | sigmaprint
You will need to set the contact and squeegee zero calibration every time you set up a new product, we do this because the thickness of the substrate (pcb) can change between product and this will effect these calibration settings. The machine does n
Electronics Forum | Mon Apr 13 14:04:49 EDT 2015 | capse
Juki GL-1.... Any thoughts? I'm New to the > industry and I'm trying to buy a new screen > printer. I have two in mind, DEK and Juki. Up front qualifier, I'm the EKRA Rep for the southeastern US. I have been involved with stencil printers for abo
Electronics Forum | Thu Aug 18 13:48:07 EDT 2011 | cbeneat
All our EKRAs are fitted with gridlok, works great.
winsouce.jpg)