Electronics Forum | Fri Apr 17 18:39:20 EDT 2020 | kumarb
You will have to bit-copy the original hard drive contents as there are some hidden registry keys on Windows for their software. In our case, the loss of the motherboard coin cell battery resulted in the software thinking that the license had expired
Electronics Forum | Fri Jun 28 10:51:15 EDT 2019 | robertogonçalves
Do you have the instruction manual for instalation de software to machine EKRA X4?
Electronics Forum | Sun Jun 17 16:55:06 EDT 2018 | kumarb
Hello. We are servicing our Ekra X4 and will appreciate any user / service manual for the Ekra E4 / X4. Also welcome consultants whom we can ask questions about this machine as required. Many thanks. kumar at softio dot com
Electronics Forum | Fri Dec 16 17:48:43 EST 2022 | kumarb
Hi. May I ask the factory default password used on the Ekra X4 printer for the PCB parameter changes? Believe it is some permutation of '4113' or similar. We had an accident recently with a drunk driver run through our building. In the process, lo
Electronics Forum | Tue Aug 17 09:05:17 EDT 2021 | kumarb
Found it...for future Ekra owners.. 689900-0573 NALGENE RECTANGULAR BOTTLE - 32 OZ Fits our Ekra X4 perfectly. Less than $10 on the market.
Electronics Forum | Fri Dec 16 20:52:50 EST 2022 | cbeneat
Double it if you need the machine settings(9060), at least that works on X5's.
Electronics Forum | Mon Feb 27 22:04:24 EST 2023 | kumarb
Hi. Our X4 is posting the attached error code. In the reference menu, the table dances to align with the SMD stencil and the shuttled PCB. During this activity, hearing some new mechanical ticking sounds that were not hear before. Any suggestions on
Electronics Forum | Tue Feb 28 22:32:38 EST 2023 | cbeneat
it looks like the table is in contact with the Y1 switch. If you can remove the cover, the motor is the R/H one. Turning the belt will move that side of the table. I'm going with the assumption that an X4 is close to an X5.
