Electronics Forum | Thu Apr 02 11:41:26 EST 1998 | Scott Cook
| Hello, | We are currently trying to design and ultimately implement a system that will be able to count and manage component placement for three Sanyo chipshooters on three SMT lines. | As the number of components decreases in the reels we want to
Electronics Forum | Wed Apr 03 07:07:44 EDT 2013 | leemeyer
The manuals will not teach you how to use Autoprogram but they will be a reference once you learn it. First you must configure your system. Try this and let me know how it goes. To Configure a machine: -Under Machine Configuration Select Assembler/S
Electronics Forum | Mon Sep 20 12:24:18 EDT 2010 | remullis
Can you remove the interlock mechanism that makes the switch from the hood insert into the switch and trick the machine then close the hood palm down and put everything back? Some machines use magnets, some use the slotted switch with a metal key t
Electronics Forum | Mon Sep 20 14:11:39 EDT 2010 | dman97
Yes I have checked both covers and they are both closed. The latch keys are sitting in their respective slots. I need to know how I can lower the hood manually or if there is a way to get into the diagnostics menu before the machine boots. Thanks.
Electronics Forum | Mon Sep 20 13:05:05 EDT 2010 | dman97
Hi, Yes I tried to do that. When I stick a key inside the slot, I still get a system suspended error. Although I can press the system switch and I can hear the locks engage, but nothing happens. the machine still thinks the covers are opened and
Electronics Forum | Thu Jun 25 12:05:34 EDT 2020 | spoiltforchoice
There is a fairly recent one. And all the conculsions need things you don't have. Buddy loading - so one person loading one verifying everything. Barcodes - gets rid of people misreading labels mixing up 4k7 with 47K or nbot seeing a decimal point o
Electronics Forum | Mon Sep 08 11:38:52 EDT 2014 | spoiltforchoice
They key requirement before any fancy tools is careful storage, stock control, labeling and handling. If your parts are incorrect before they even get to production, you're screwed. As gregp suggests, to get consistently correct value and orientation
Electronics Forum | Fri Dec 09 15:10:55 EST 2011 | davef
Can you use the equipment manual as the basis for learning how to use the machine? Each model of printer has different alignment techniques. We don't have a clue of your model type. So, we'll approach the question from its most basic point. Registe
Electronics Forum | Wed Sep 08 23:36:12 EDT 1999 | Jason Tomlinson
| | | Dear all, | | | | | | I don't know if I'm asking at the right place here, since you all seem to be more focused on process problems then programming problems (or perhaps programming isn't a problem for you). | | | | | | I'm using FUJI CP642's
| 1 |
winsouce.jpg)
.gif)
