Electronics Forum | Fri Mar 17 07:51:49 EST 2000 | Peter Barton
John, I have had previous experience of immersion silver coated PCB's in place of HASL coated type using no-clean processing with little or no problem at all. All of the process parameters were left unchanged. There is a very minor difference in th
Electronics Forum | Thu Oct 21 14:02:32 EDT 1999 | Ron Costa
We are a contract manufacturer currently building a job with IBM CBGA-255 devices and 20mil QFP's that are close to each other. We use a 6 mil laser cut and electro polished stencil with one to one apertures on the BGA's. The customer is experiencing
Electronics Forum | Fri Jun 14 14:30:36 EDT 2002 | davef
Assuming you are talking about solderable surfaces: People specify various materials to protect the solderability of the pads on the board. Gold, actually, Electroless Nickel - Immersion Gold [ENIG], is popular. * Board fabricators like it because
Electronics Forum | Thu Jan 12 02:08:47 EST 2006 | adeline_ko
Hi, What is the different between Electroless Nickel / Immersion Gold (ENIG) and Immersion Au. Are they refer to the same finishing? We has been using the Gold thickness (0.00005 - 0.00013mm) , nicket (0.0025mm) for all Gold finishing brd (Immersio
Electronics Forum | Sat Jul 24 10:20:15 EDT 1999 | Bob Willis
PCB Solder Finishes Survey Questions 1999 Results for the 1996-7 survey are located at www.smartgroup.org As a number of SMART people have requested an update on the solder finishes survey SMART Group have run in the past here is your opportunity t
Electronics Forum | Sat Nov 14 08:05:54 EST 1998 | Earl Moon
| | | | I believe that gold fingers on my circuit boards are being | | | | contaminated and need to clean them with some chemical | | | | solution. Any recommendations. | | | | | | | Chuck: What is the type and source of your contamination? Dave
Electronics Forum | Thu Mar 11 10:31:57 EST 1999 | Justin Medernach
| NASA CommQuest | | | Photopolymerized Conducting Polymers | | Directions: | 1.Please read the information provided on this technology. You may follow the links to additional information resources below. | | 2.After evaluating the technology,
Electronics Forum | Thu Jul 02 15:23:15 EDT 1998 | Justin Medernach
| | I'm having a problem getting good reflow on gold sufaced boards. The profile looks good and I have adjusted it both hotter and colder and adjusted the various times ( soak, reflow ) to no avail. What realy gets me Is that a month ago we built som
Electronics Forum | Thu Dec 14 12:18:01 EST 2000 | genny
Hello all, Our company has always used HASL finish on our products. Recently however, we have a had a problem on a couple of boards that I have been told cannot be avoided with HASL, and we should switch to ENIG(electroless nickel immersion gold).
Electronics Forum | Mon Oct 25 14:48:29 EDT 1999 | William
All, I am having a problem with joints being soft after SMT. Especially 25 mil and smaller parts. It seems as though you can slide the leads right off of the solder. It takes only about 30-40 oz. of compression at 45 deg. to move leads off of join
.gif)
