Electronics Forum | Fri Aug 01 12:35:54 EDT 2003 | blnorman
Kester recommends that we store our 1400 gm tubes on the tip. Our documentation is based on their recommendation. The Alpha past we used was stored horizontally, but that was because the flux readily separated from the metal.
Electronics Forum | Tue Jul 29 17:05:10 EDT 2003 | bradlanger
Has anybody had experience with BTU and Heller Reflow ovens? What are the major differences if any? Which one would you prefer?
Electronics Forum | Tue Jul 29 17:56:45 EDT 2003 | Bill Petlock
Brad, I sell both machines on the used market. If you buy the proper oven for your use you should be very happy with either. Both companies are very reputible and responsive when you have problems.
Electronics Forum | Wed Jul 30 23:16:01 EDT 2003 | praveen
The profile is enclosed.The PBGA is 37x37 mm.I am keeping the gap about 4-5 mm.The profile meets the solder paste spec.Peak temp is 211 deg C,Above melting point 77 sec. rate of heating
Electronics Forum | Thu Jul 31 21:21:54 EDT 2003 | praveen
Yes we are baking the boards and the BGA. Using a CDM material pallet to hold the PCB as clamping is a problem without that.
Electronics Forum | Thu Jul 31 05:55:03 EDT 2003 | Richard Mitchell
Ken, Just wanted to correct some of your information. OK International is owned by Dover Company. Dover company also owns Universal, Hover - Davis, DEK, Soltec-Vitronics. But it will be interesting to see what happens to speed line, does it stay as
Electronics Forum | Tue Sep 23 22:53:15 EDT 2003 | SMT_insider
As an insider I can tell you that things are trending towards a break-up of the division. At this time it is unclear if they will be sold or closed. A re-rationalized business will see reduced offerings in printers and dispensers...stay tuned...these
Electronics Forum | Wed Jul 30 11:06:57 EDT 2003 | Dale
I have 2 rechargable digital camera batteries. One came with it and one was bought some time later. Is there a way to test them to see which has the least wear? I want to find out which is closer to it's demise and which has the most charges left in
Electronics Forum | Wed Jul 30 20:14:36 EDT 2003 | davef
You need to measure the voltage across a resistor that is connected between the terminals of your battery. For more look here: http://www.dansdata.com/cambattery.htm
Electronics Forum | Wed Jul 30 16:16:19 EDT 2003 | swagner
What is the industry standard for wave and selective solder PPM defect rate for a world class facility, any responses are appreciated.
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112
