Electronics Forum | Wed Dec 07 00:44:31 EST 2005 | arnold
were having a problem on the units after soldered. after few hours or days the soldered wires has green decay. what does it cause. how can i prevent this.
Electronics Forum | Thu Dec 08 08:13:48 EST 2005 | grantp
Hi, Copper oxide is green right? So the green residue after a few days is corrosion of the wire? Regards, Grant
Electronics Forum | Thu Dec 08 18:59:04 EST 2005 | KEN
Is this a wire dip tinning process? If yes, then your flux is probably trapped under the insulator, causing corrosion. BAD BAD BAD (hopefully you don't make wire harnesses for air planes or passenger trains). More info please.
Electronics Forum | Tue Jan 03 07:12:22 EST 2006 | Slaine
on church copper roofs they call the green stuff verdigree (dont know if ive spelt it right)
Electronics Forum | Mon Dec 12 11:47:34 EST 2005 | Frank R.
Dave, I need your opinion ... Could you please give me the name of the most popular wave companies. Thanks Frank
Electronics Forum | Mon Dec 12 16:37:24 EST 2005 | pjc
http://www.speedlinetech.com/electrovert/index.aspx Speedline Tech sells factory renewed systems. You can get a wave in the $60K range.
Electronics Forum | Tue Dec 13 09:24:24 EST 2005 | Frank R.
Thanks a lot Jay, Pete and Dave for your information. As I can understand, all these companies offer good products. I will contact them for more informations. Thanks again Merci beaucoup Frank
Electronics Forum | Tue Dec 13 23:05:29 EST 2005 | KEN
Wasn't specnor a split from Electrovert or maybe it was the other way around. I believe specnor is Canadian. I have bought replacement parts for my EV650C ultrapak from Specnor. Plus my 1991 vintage Ultrapak was made in Canada!
Electronics Forum | Wed Dec 07 22:39:03 EST 2005 | Alan
Robert, you will have to re-load the MINT software. It only takes a couple of minutes to do this. This will fix out the errors. Refer to your DEK manuals on how to carry out this function. Cheers, Alan.
Electronics Forum | Fri Dec 09 02:26:31 EST 2005 | Alan.
Robert, power on the machine and go straight into DOS. You can do this by pressing and holding the Shift key as the machine is booting up. Run MINT. Try re-seating the cards too before you do this. Have you checked the voltages on the card batteries.
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112
