Electronics Forum | Fri Apr 05 07:17:55 EDT 2013 | leemeyer
I've never seen one but i've been told that there is a 2 tier vib plate where the top plate is set back a bit so that the nozzle can pick from the top and bottom plate. OK so you have the plates on the machine and have entered their coordinates. Cl
Electronics Forum | Fri Apr 05 13:53:56 EDT 2013 | microaide
0.700. What is special about 0.700? My part is an SOLIC14, which has a length of 0.350. So 0.700 is exactly twice the length of the part. Is there a problem feeding a part from a vibratory feeder if the escapement length is more that twice the lengt
Electronics Forum | Mon Apr 08 07:20:56 EDT 2013 | leemeyer
What operating system are you using ? I have found that you need to stay with a DOS based operating system. I am running DOS 6.2 with windows 3.11. I tried win 98 and although it seemed to run properly, I would have problems in the final program. XP
Electronics Forum | Tue Apr 09 08:56:18 EDT 2013 | leemeyer
I made a new program today that will run on 2 machines and my AP did not create the 2 additional boards that you are speaking of. I'm not sure what thats all about. This is my method: 1. Set up a Assembler/system in AP that includes both machines tha
Electronics Forum | Wed Apr 10 15:05:23 EDT 2013 | microaide
I followed your instructions and did NOT select the option to break up the program for separate central controllers. I now have a program I can copy to central controller #1, and I can delete the head 2 data from the program. Now when I select RUN TH
Electronics Forum | Wed Apr 03 04:08:20 EDT 2013 | ericrr
Yes well, now we used to add a bit of flux to our leaded paste to make it slightly runny, But when we went to unleaded paste the joker who came in from another company to set the temperature on the oven said "you dont add anything to unleaded paste!.
Electronics Forum | Wed Apr 03 19:03:31 EDT 2013 | hegemon
In agreement, in that you should have already printed enough paste on the board to accomodate the joint. Adding paste would give the result you described. (too much solder) Adding a little flux (only) and heat would be the correct path out of that s
Electronics Forum | Tue Apr 09 14:54:22 EDT 2013 | christian01976
Hello! I dont know where you are from but here in Germany Assembleon stopped selling Yamaha machines. Yamaha now sells their machines on their own. The things I know: Yamaha YS24 is equal to Assembloen MC24 Yamaha YS24x equal to MC24x YS12 is MC12
Electronics Forum | Fri Apr 05 18:22:18 EDT 2013 | Adam
We have two ZipaTec 460s Selective Solder Machines, one for Lead and one for Lead-Free. This morning we noticed the solder pot was covered in solder balls, and after asking the operator what they had run, the answer was "Nothing." The operator had al
Electronics Forum | Thu Apr 11 11:24:55 EDT 2013 | markhoch
Thank you for your advice Eric. Different SMT Machine Platforms have different methods for handling these PCB Panels with bad circuits. (Commonly known as "X-outs"). Some platforms allow you to identify X-Outs simply by darkening in the first fid
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835
