Electronics Forum | Thu Feb 06 17:56:52 EST 2003 | pjc
Batch vs. In-Line for straight aqueous cleaning applications tends to be all about production. You'll have to see what cycle times you get from the various batch systems out there vs. the in-lines. In-Lines come in various sizes. Some of the leading
Electronics Forum | Sun Mar 06 20:08:38 EST 2005 | mrduckmann2000
Davef, You have a good question. If we had perfect design engineers out there that would use the proper component spacing and not put SMT parts between and around thru-hole parts - glue and wave would work perfectly. I have done this with great su
Electronics Forum | Wed Sep 05 17:37:56 EDT 2001 | seand
Hello Jeff, If you have components on your board be careful of how low the frequency is that you will be applying to your board. Ultrasonics are great for cleaning stencils and bare boards at around 40kHz. These frequencies (and Lower)may however
Electronics Forum | Thu Feb 19 12:45:05 EST 1998 | Earl Moon
| I have an Electrovert Ultrapak 445 Wavesolder machine with 3 IR preheat zones and a single wave with omega wave. | I want to run a DOE (Taguchi) to determine the optimum settings for soldering both single-sided and | double-sided boards. Can any
Electronics Forum | Thu Oct 23 09:49:18 EDT 2008 | davef
We're not sure the specifics that BLT Circuit Services Ltd referenced, but many companies use dross reducing agents in their wave solder pots. Among dross reducing agent suppliers: * Fry [4100 Sixth Ave, Altoona, PA 16602; 814-946-1611 F814-944-8094
Electronics Forum | Tue Mar 20 08:04:47 EDT 2018 | spoiltforchoice
Those of us doing low volume with mesh ovens and double sided boards will often use the titanium strips used for making boards more rigid for wave soldering. Gives you enough clearance for lower profile items that you would typically find on the firs
| 1 |
.gif)
