Electronics Forum | Thu Sep 09 13:25:22 EDT 2010 | eezday
I've seen the purple silkscreen before on ENIG board built with PbSn process. I would think that if temp is the issue the lower process temp would not have caused the purple ink. I remember that the flux I used was water soluble and I attributed th
Electronics Forum | Fri Jul 18 10:46:43 EDT 2003 | davef
If you are saying that you have discolored white tin at in-bound inspection, you have bad boards. The boards are fabricated incorrectly. Your fabricator is deficient. That is the GREAT thing about imm coatings. You can look at them and determine
Electronics Forum | Wed Aug 11 18:36:03 EDT 2004 | davef
90 Knoop. Q2: Thickness is 4 to 10 u" for Au and 300 to 400 u" for nickel A2: This looks like a ENIG spec. Although, the Ni is quite heavy, 150 uin is sufficient for most applications. [IPC-4552 ENIG specification: * Gold thickness of 0.075 - 0.125
| 1 |
.gif)
