Electronics Forum | Tue Jan 04 12:37:41 EST 2005 | Cmiller
We have been using this finish almost exclusively for fine pitch boards for about 5 years. Make SURE you use a board house that does the gold plating in-house. There are some potential issues as DaveF stated. The only problem we have encountered is w
Electronics Forum | Thu Jun 16 17:02:40 EDT 2011 | boardhouse
The finish looks like Immersion Tin or Silver. if its lead free Hot air - could be issue of to high of a Tin Content. find out what brand of Hasl they are using. SL100 Example. Is this tarnished look only being seen after assembly or have you seen
Electronics Forum | Wed Nov 09 07:43:12 EST 2022 | micropak
ENIG boards have low shelf life as oxidation starts showing up quickly on the solderable areas. We usually keep them vacuum packed till they are ready to be assembled. Most PCB manufacturers will send them vacuum packed.
Electronics Forum | Thu Dec 14 19:38:28 EST 2000 | Dave F
OK, now let me ask the really dopey question ... so if the irregularity of the HASL surface is punching holes in the thermal gasket and causing shorts to the heat sink, why are you putting solder on that surface? I wonder how the thermal conductivit
Electronics Forum | Mon Jul 22 17:29:03 EDT 2013 | jorge_quijano
I have Ag & ENIG finishes, for Ag I've seen some oxidation, specially if the bag is not sealed propperly. Is there any real due date for PCBs?
Electronics Forum | Mon Apr 28 09:59:04 EDT 2003 | davef
Your customer's question is reasonable. Soldering to nickel is not always a walk on the beach [can of corn, or whatever]. This issue is flux not solder. Your Sn63 will have plenty of strength, providing the solder connection is well formed. You s
Electronics Forum | Thu Nov 10 20:39:44 EST 2022 | SMTA-64386598
The solderability shelf life of ENIG is related almost entirely to diffusion of O2 through the gold plating. When O2 diffuses through the gold, the underlying nickel is oxidized rendering it unsolderable (with ENIG - you solder to Ni, the gold dissol
Electronics Forum | Fri May 28 13:19:31 EDT 2021 | cbart
I can't see the image very well, but from what i see it looks like oxidation. looks like an ENIG finish on the board, possibly a plating issue from the bare board house, thin gold or the nickle is to thick. one other question i would get an answer t
Electronics Forum | Fri Mar 14 11:04:54 EDT 2008 | herman
Samir, To correct some misconceptions on the answers to your question, and "what you know from experience": With both ENIG (Electroless Nickel/Immersion Gold-IAu) and IAg (immersion silver), soldering does not take place to the gold or the silver. Wh
Electronics Forum | Tue Apr 27 21:24:14 EDT 2021 | kwalker
No, you're correct. Nickel oxidation can be difficult to remove
