Electronics Forum | Mon Jan 03 12:26:16 EST 2005 | barryg
We are looking at potentially doing a pcb that is enig finished as called out on its fab. drawing. We plan on a standard 63/37 water soluble paste. Is there any pro's and cons to this process with a pcb plated as such. What is the main advantage that
Electronics Forum | Fri Oct 14 16:51:46 EDT 2005 | GS
It stands for Elettroless Nikel Immersion Gold, a kind of PCB finishing Entek (there are several kinds) is a brand name of an OSP (Organic Solderability Preservative)kind of PCB finishing. Regards............GS
Electronics Forum | Tue Jan 04 12:37:41 EST 2005 | Cmiller
We have been using this finish almost exclusively for fine pitch boards for about 5 years. Make SURE you use a board house that does the gold plating in-house. There are some potential issues as DaveF stated. The only problem we have encountered is w
Electronics Forum | Wed Jan 19 19:14:12 EST 2022 | charliedci
Looking for opinions on pic attached of ENIG finish. appears to be over-etched gold, but I am not trained up on PCB fabrication.
Electronics Forum | Thu Sep 30 16:16:14 EDT 2010 | vetteboy86
Were doing double sided, and I'm told our PCB finish is tin silver. From a quick search I'm finding that for double sided assemblies we would be better off using ENIG.
Electronics Forum | Thu Jan 20 21:29:48 EST 2022 | stephendo
Copper gets etched in a photographic manner. ENIG is an additive process. Nickel gets added then gold gets added on top. Therefore it is not a matter of over etching. It is a matter of not enough gold added. The layer of gold ideally is as thin as po
Electronics Forum | Wed Oct 06 04:11:35 EDT 2010 | grahamcooper22
I've done minimal research to this point and > understand my issue with solder on the double > sided boards is due to oxidation that occures on > the unpopulated pads when the board makes its > first trip through the reflow oven. > > We did run
Electronics Forum | Tue Jan 23 20:57:12 EST 2007 | asir
Can some of you kindly share some of your experiences with PbF PCB finish (OSP, ENIG, Immer Sn, Immer Ni,etc.) What are the benefit and disadvantage? Some of the issues that has been encountered. Which one you would recommend?
Electronics Forum | Sun Jul 04 19:32:16 EDT 2004 | indy
What is the most popular PCB finish for lead-free soldering ? We are using ENIG and trying out Paladium-Silver. Are tin whiskers an issue for anyone ? tin whiskering becomes a big issue if you have any military company as your client. They still p
Electronics Forum | Wed Jan 13 04:27:00 EST 2016 | crystalpcb
Hi Here is our factory production capability: Shenze Electronic PCB Specification Layer Count 1 to 35 Layers Material Brand Shengyi,KB,GRACE,ISOLA,Rogers,Taconic,ARLLON,Bergquist Base Material FR-4（TG135,TG150,TG170,TG180），Halogen Free FR-4，Ceramic
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
.gif)