Electronics Forum | Tue Dec 12 07:11:55 EST 2017 | esolano
Hi l have Yamaha YSi-12 AOI,I am looking error codes manual.lf any one have please advice. my id is atulpant@tekmart.com. Thanks Atul
Electronics Forum | Thu May 26 15:28:41 EDT 2005 | jh0n!
It looks like there's another one or two threads somewhat similar, but allow me to pose another. We've only about two years experience in SMD production, and we're just starting to really ramp-up. As we stand right now, I'm not recieving informatio
Electronics Forum | Tue Jul 30 09:05:08 EDT 2024 | spoiltforchoice
SMT Maestro is long gone from the wider web. You have to beg those of us who have a copy to share a link or find one of the previously shared links in this forum and see if it is still active. Technically this basic requirement is not that difficult
Electronics Forum | Thu Aug 14 12:57:45 EDT 2014 | rgeary
Does anyone know what the following error indicates on a MyData My12 running 2.9.2. "F-MOT-MSETDYN C/156"?
Electronics Forum | Thu Aug 14 13:49:26 EDT 2014 | dyoungquist
Motor control MSETDYN -> Initiate axis C -> Centering jaws 156 -> Motor timeout Did not reach specified position Hardware problem Looks like you have something wrong with the movement of your centering jaws.
Electronics Forum | Thu Aug 14 15:07:43 EDT 2014 | rgeary
Yes, thank you. Found out that machine ran over two parts to tall and damaged the cover plate over the centering.
Electronics Forum | Thu Jul 30 08:36:29 EDT 2015 | kevinb
I have a K&S 7500 dicing saw with an error code. It reads (F005 system environment is not correct-reinstall system). There is no more support for this machine and I would like to find some help with my problem
Electronics Forum | Fri Jul 07 17:33:25 EDT 2023 | jdengler
Since you haven't received any useful advise I will throw my 2 cents in. I do not know this machine but in general what you describe is an axis that does not get it's home pulse in time. Many machines will have an in-range sensor that gets flagged
Electronics Forum | Wed Aug 12 18:06:33 EDT 2015 | bnorton
Here's the end of Logicomm capture on Force COMM2 where it starts the Lantern system not active messages. Couldn't get attach to work. Startup and earlier .ldx file loading omitted ulLoadTasks(): Opening the RFS pseudo device driver ... ulLoadTas
Electronics Forum | Sun Aug 30 15:32:33 EDT 2009 | jimmyboz
most fuji error codes are 8 digits, A21E is 2100A21E, it is a report from the MCS that transmission has failed (we knew that) Hit control E from the main screen of the MCS, there should be another error reported from the cp6, ie. 1101000 is x data ou
.gif)
