Electronics Forum | Wed Sep 28 20:54:04 EDT 2005 | Ken
I would run scale calibration first (for the suspect camera). That may be your only problem. However, if your having a rotation issue and all major angles are off (differently) then it is most likely R-axis accuracy. However, I would run AMF and
Electronics Forum | Wed Nov 12 06:23:09 EST 2008 | griffin
One thing to consider regarding the capacitor, The leads are not 100% straight beneath the plastic bottom part. And if you align with regards to the two leads, the leads will be aligned to the pads of your board, but the body of the capacitor is look
Electronics Forum | Sat Apr 25 19:40:01 EDT 1998 | Stan Traxler
| We have to mount our SMD devices 0.1 to 0.4 mm off the pcb | PCb substrate to compensate for thermal stressing in a | Space enviroment. Has any one any ideas or contacts for | dissolvable pads. this only applies to leadless components We have appl
Electronics Forum | Thu Feb 04 20:31:10 EST 1999 | Dave F
| I'm researching SO-8 power RF device mounting methods. | | Possible mounting method | | 1. Via thru holes | | Still the thermal resistance of the PCB too high | | Do you have suggestions for mounting the component, PCB/? | Joni: What is it ab
Electronics Forum | Fri Feb 05 04:18:44 EST 1999 | Joni Siipola
| Joni: What is it about your situation with the board/component/process that makes you want to explore alternatives? Dave F Dave: In our case the component is placed on metalled footprint which has via holes to transfer the heat via holes to the
Electronics Forum | Thu Feb 04 04:16:56 EST 1999 | Joni Siipola
I'm researching SO-8 power RF device mounting methods. Possible mounting method 1. Via thru holes Still the thermal resistance of the PCB too high Do you have suggestions for mounting the component, PCB/?
Electronics Forum | Fri Apr 17 07:45:43 EDT 1998 | Robert Meston
We have to mount our SMD devices 0.1 to 0.4 mm off the pcb PCb substrate to compensate for thermal stressing in a Space enviroment. Has any one any ideas or contacts for dissolvable pads. this only applies to leadless components
Electronics Forum | Mon Nov 10 19:34:20 EST 2008 | snsmt
Hello all, As you know, i have slowly begun programming the philips topaz-x machine. For one board that i programmed, everytime i place a board threw the machine, the parts mount differently everytime. The part that I am trying to mount is an ind
Electronics Forum | Fri Nov 14 17:37:58 EST 2008 | snsmt
WHat about bad mounting? i have 2 fixtures and sometimes it would mount with no misalignment and sometimes it would. WHat could be the problem in this case/ I know the fixtures are good because they work on a different program that we have. I don't u
Electronics Forum | Fri Apr 17 14:37:13 EDT 1998 | Justin Medernach
| We have to mount our SMD devices 0.1 to 0.4 mm off the pcb | PCb substrate to compensate for thermal stressing in a | Space enviroment. Has any one any ideas or contacts for | dissolvable pads. this only applies to leadless components Robert, Try
