Electronics Forum | Fri Jan 11 05:15:32 EST 2008 | tacho
Hi, Stano and hi everybody. I am a new boy here, but I will try to solve Stano's problem. Switch off the bridge button on ERSA.The location of this button is on the right side of the alarm and under +/- buttons. In your case this button is lighting i
Electronics Forum | Fri Nov 14 12:41:30 EST 2014 | duoman
I also operate a 3/45. In order to flux from the top, you would need to have another system on top similar to what you already have on the bottom. There just isn't room for all of the required equipment. Who did you contact at ERSA? I have always had
Electronics Forum | Sun Sep 27 23:10:19 EDT 2009 | hallwayit
Hi, Walter, Why don't you try no-clean flux? We ever met the same condition, later, we changed to no-clean flux solved the problem.
Electronics Forum | Thu Sep 03 11:20:41 EDT 2009 | thunderdog5000
I have a customer that is having a flux residue problem after wave soldering. Flux is roaring through the board to the top side and leaving a residue. This is only happening on the flat stamped leads. The round leads are fine. They are using Supe
Electronics Forum | Fri Sep 04 02:09:03 EDT 2009 | sachu_70
Hi Walter, Do you refer to a sprayfluxer operation? The problem seems to be a parameter setting issue. 1. Ensure the wide angle spray reaches PCB with optimum jet pressure. You could pass a glass plate to understand flux coverage and view Jet pressur
Electronics Forum | Fri Mar 27 10:04:51 EDT 2009 | ericthered
We have been having problems with proper wetting when running mainly lead free but also leaded solder in our Ersa Hotflow 3. Solder either often looks grainy or doesn't flow over the whole pad. This is generally the case when my profile is 170 firs
Electronics Forum | Wed Jul 01 10:48:21 EDT 2009 | mschmidt23
My company recently purchased an Ersa Versflow and I am looking for a flux that will work for this machine.
Electronics Forum | Wed Jul 08 07:01:16 EDT 2009 | Jeff
We use Kester 979 no clean flux in our Ersa.
Electronics Forum | Thu Jan 18 15:28:10 EST 2007 | CK the Flip
If you are, in fact, running a No-Clean solder paste: Different no-clean solder pastes will leave different types of (benign) residues. If your paste has been qualified from a Bellcore/SIR/Electromigration standpoint, any residues remaining will NO
Electronics Forum | Thu Feb 12 17:20:11 EST 2004 | adlsmt
Anyone have a flux that is good at preventing bridges for this application?
.gif)
.gif)
