Electronics Forum: ersa nozzles (Page 3 of 6)

Rework Station

Electronics Forum | Fri Jan 10 09:38:36 EST 2003 | larryk

We been using the ERSA for a couple of years now with no problems. Guess I can't comment on the poor service as I haven't required their services. I sampled in all the units you mentioned, each was nice in their own way. One of the things that influe

smt rework

Electronics Forum | Thu Nov 09 13:43:48 EST 2006 | RJ K.

Can anyone tell me an approximate cost of the PDR 410 and/or ERSA IR rework station? Is the main advantage of using these systems over a hot air machine in that nozzles are not needed?

ERSA Selective Solder questions

Electronics Forum | Thu Apr 25 12:26:35 EDT 2013 | emeto

Hi, I was using different brand machine but it will behave the same way as yours when it is dirty or clogged. Try to clean your nozzle and your supply mechanism(pump, propeller...) and you should get a smoother wave. Good luck!

ERSA Selective Solder questions

Electronics Forum | Thu Jun 06 10:11:06 EDT 2013 | eniac

azhiker, for me I selected method A. But I don't turn off wave and apply acid directly to nozzle with solder.

ERSA Selective Solder questions

Electronics Forum | Thu Jun 06 14:20:39 EDT 2013 | azhiker

Bill, ENIAC, Thank you for your input. I'll do some research on the items you suggested and give it a try. The idea of having a steal nozzle that is thinned is defintely new to me, so I will check into that, as well as the brushes. Thank you guys.

ERSA Selective Solder questions

Electronics Forum | Thu Jun 06 14:22:16 EDT 2013 | azhiker

Bill, ENIAC, Thank you for your input. I'll do some research on the items you suggested and give it a try. The idea of having a steal nozzle that is tinned is defintely new to me, so I will check into that, as well as the brushes. Thank you guys.

ERSA Selective Solder questions

Electronics Forum | Thu Aug 29 13:36:50 EDT 2013 | williamaxler

You do not need much. We just take out pencil style stainless brush dip it in the powder and then scrub the nozzle.

ERSA Selective Solder questions

Electronics Forum | Wed May 08 11:30:58 EDT 2013 | jaimebc

Stephen, We are now running with 99.999 N, New nozzles and our wave height has stabilized. I will look into the Apidic Acid to clean our nozzles. Thanks for the input. I am just amazed at the difference the nitrogen grade made to our process. Goin

ERSA Selective Solder questions

Electronics Forum | Thu Jun 06 10:05:57 EDT 2013 | azhiker

OK guys, we got our Adipic acid. What is the preferred methode of applying it? a) Nozzle mounted, momentarily turn off wave and then brush? Or b)coat nozzle with the acid then mount it and turn wave on? By the way, we are using Indium flux WF-994

ERSA Selective Solder questions

Electronics Forum | Mon Apr 29 13:56:19 EDT 2013 | williamaxler

We have a Versaflow 40/50 and ours is setup like this. We have out nozzle test position set so that in the Z axis you are 3.8mm away from the pin. Used feeler gauge Then you can set your gradient per nozzle. Start with a number then do a wave offs


ersa nozzles searches for Companies, Equipment, Machines, Suppliers & Information