Electronics Forum | Thu Oct 04 00:00:58 EDT 2018 | gaintstar
Flason SMT Reflow Ovens: http://www.flason-smt.com/product/China-Reflow-oven.html http://www.flason-smt.com/product/China-Samsung-EXCEN-PRO-High-Speed-SMT-Modular-Chip-Mounter-agent.html http://www.flason-smt.com/product/China-Samsung-SM321-High-Spe
Electronics Forum | Mon May 09 17:27:46 EDT 2005 | cmiller
They are expensive so you need to have a lot of jobs that take a long time to hand solder or have a ton of masking. Also look at bottom side wave soldering, if you are having a lot of defects, the selective will allow you to solder both sides in surf
Electronics Forum | Tue Aug 30 10:48:18 EDT 2005 | cmiller
If you do not have a lot of TH joints there are some advantages. No boards "submarined" in solder pot on wave. You can solder the bottome side SMT parts rather than epoxy them when the parts are put down. This should reduce SMT defects and missing pa
Electronics Forum | Thu Sep 01 01:07:08 EDT 2005 | cmiller
We have a dual pot machine. The fluxer is not the slowest part of the process on most boards. However, we looked at running boards that had many hundreds of TH leads that we currently run through the wave in order to try not to buy a wave for lead-fr
Electronics Forum | Mon Apr 29 12:32:18 EDT 2013 | stephendo
Do you watch when it is doing the wave height test? Watch it and see if it goes up to the same spot on the test probe each time. If the test probe is dirty sometimes the solder has to go up higher on it before it gets detected. You might actually be
Electronics Forum | Fri Jul 29 09:31:29 EDT 2005 | lupo
Hello, I am not familiar with Inertec but have some expirience with selective soldering process, My oppinion is that the wave and slective soldering are not the same game. In Selctive soldering process is very important the layout design. If use th
Electronics Forum | Wed Jun 01 19:31:03 EDT 2016 | marcelll
Strange problem with a Versaflo selective wave Very long for the pot to reach is set temperature ( 5 h ) At 180 C, the pump doesn’t seem to start like it should be So very long to heat the bottom of the pot Finally, the bottom element is turning on
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Tue Sep 28 08:55:21 EDT 1999 | Earl Moon
| | | | | | | | | | | Hiya, | | | | | | | | | | | | | | | | | | | | | | Could anyone please suggest recommended manufacturers of | | | | | | | | | | | IR rework stations for the removal of various SMT comps. | | | | | | | | | | | | | | | | | | | |
Electronics Forum | Tue Sep 28 04:07:33 EDT 1999 | Jacqueline Coia
| | | | | | | Hiya, | | | | | | | | | | | | | | Could anyone please suggest recommended manufacturers of | | | | | | | IR rework stations for the removal of various SMT comps. | | | | | | | | | | | | | | Cheers | | | | | | | | | | | | | Why IR ?