Electronics Forum | Thu Sep 01 01:07:08 EDT 2005 | cmiller
We have a dual pot machine. The fluxer is not the slowest part of the process on most boards. However, we looked at running boards that had many hundreds of TH leads that we currently run through the wave in order to try not to buy a wave for lead-fr
Electronics Forum | Thu Jun 22 13:01:23 EDT 2000 | DTRoxell
I am looking for anyone who uses the ERSA Select Solder machine with pallets. Does anyone know if you can run pallets with this machine?
Electronics Forum | Mon Jun 19 16:13:19 EDT 2000 | Billy
We are going to be getting an ERSA Selective Soldering Machine in shortly, has anyone had any experience with this type of machine? If so, please let me know. Thanks, bw
Electronics Forum | Wed Jul 26 09:14:47 EDT 2000 | Peter J. Lensch
Hi DT, there is a pallet type system available from ERSA. Please contact ERSA Inc in Wisconsin, Bob Klenke, phone number 262 375 6844. PJLensch ERSA GmbH in Wertheim
Electronics Forum | Thu Feb 15 19:56:25 EST 2024 | duchoang
Hello, We have Versaprint ERSA Printer. The machine has been working so well since over 10 years. Now, the vaccum cleaning option is not workinh anymore. The machine stops right before the vaccum cleaning start. Any idea to help fixing that problem?
Electronics Forum | Fri Jul 07 16:04:42 EDT 2000 | DONALD
We have an Ersa selective soldering machine here. We use the wire solder with the automatic feed. We dross and clean the pot roughly once a week. You can tell when it needs it by looking at the solder fountain. We do the nozzle at the same time. We c
Electronics Forum | Thu Apr 25 09:57:31 EDT 2013 | jaimebc
We aquired an ERSA ECOSELECT 2 selective soldering machine. So we are going through a learning curve and I would like to hear from ERSA users on this subject. The main concern is to keep the miniwave steady, it seems that it " bounces" a lot and is
Electronics Forum | Wed Nov 15 10:51:44 EST 2000 | jackofalltrades
Have you tried using offsets to begin to move the head away in the Z axis while it is moving in a lateral ( X Y ) direction. The spikes are difficult on the Ersa, but experiment with hitting the location from different directions may help also.
Electronics Forum | Wed May 01 11:31:38 EDT 2013 | jaimebc
Stephen, Bill, Thaks for your input. We are currently waiting for nozzles since the ones we have are badly oxidized. We do have a deoxidizing gel that we got from ERSA, not sure if it contains Adipic Acid, but it is what was suggested we used. Once
Electronics Forum | Tue Nov 14 16:06:27 EST 2000 | zorox
We have an ERSA machine here where we have solder "spikes" occasionally. We have made sure our flux is dispensing properly, we have adjusted z axis speeds, our preheater is heating properly, adjusted XY speeds, etc. Can anyone think of something we m
.png)
.jpg)