Electronics Forum | Sun Apr 12 21:37:52 EDT 2009 | padawanlinuxero
HI !!! We have the same oven! and yes profiling is hard, but not that bad. Check with the solder paste company for information, right out of my head dont remember for the temps that we use on mondayIcan show you my profile so that youhave an idea
Electronics Forum | Mon Apr 13 12:32:55 EDT 2009 | ericthered
That would be great Armando, thanks. Also, what changes might I make with metal clad light boards (LED). heat transference is tricky with these and the solder is not wetting well.
Electronics Forum | Fri Mar 27 10:04:51 EDT 2009 | ericthered
We have been having problems with proper wetting when running mainly lead free but also leaded solder in our Ersa Hotflow 3. Solder either often looks grainy or doesn't flow over the whole pad. This is generally the case when my profile is 170 firs
Electronics Forum | Tue Mar 18 12:43:16 EDT 2008 | fsw
All, Thnx for all your inputs. We have decided to use Rapid Lock sockets & pins instead of soldering the wires.
Electronics Forum | Wed Apr 11 16:09:16 EDT 2007 | egrice
Robot soldering has never really worked well and if you are looking for any volume or repeatability, you may be disappointed! Even though you are using a robot, you are still soldering with an iron and wire solder. This process cant guaranty the be
Electronics Forum | Wed Jul 27 18:41:48 EDT 2005 | crishan
Aj, You are correct, we use pallets to hold the motherboard, an X-Y table then transports the pallet through preheat section to the solder bath. I will check out your recommendations on the solder alloy. Supplier is not willing to share PPM data o
Electronics Forum | Fri Jul 29 09:31:29 EDT 2005 | lupo
Hello, I am not familiar with Inertec but have some expirience with selective soldering process, My oppinion is that the wave and slective soldering are not the same game. In Selctive soldering process is very important the layout design. If use th
Electronics Forum | Wed Jul 07 16:15:54 EDT 2021 | bobpan
We have an Ersa and an Ace machine. The Ersa is made for bigger volumes of boards. Programming is longer/harder and not as user friendly. If your running 100 boards or less.....the Ace is the way to go. If you need flexibility the Ace is better.
Electronics Forum | Thu May 20 09:28:21 EDT 2004 | Joe N>
Take a look at Ersa at http://www.jdnoble.com
Electronics Forum | Thu Jun 20 05:50:48 EDT 2019 | bukas
Hello everyone, I'm out on market for wave soldering machine. I have been using ERSA 330 ETS for three years now, but it is quite old and I would like something newer. I'm considering ERSA N wave 330, yom 2005; and SEHO PowerWave 8440, yom 2010. Wha
