Electronics Forum | Wed May 19 19:41:12 EDT 2010 | jry74
Our employees use a knit style ESD glove when masking boards to prevent oils. They snag alot and bend leads and cause other problems. I have tried dipped palm but they are bulky and dont offer "feel". I tried a silky type but they had a huge seam
Electronics Forum | Wed Feb 13 09:51:14 EST 2013 | cnotebaert
Does anyone know of a masking material that could be applied over test pads that could be left on board that ICT test probes will pierce? could be tape or dispensed material. Thanks!!
Electronics Forum | Thu Jan 22 11:58:32 EST 2009 | davef
Brian: Does green painters tape present ESD issues? What does your field meter show?
Electronics Forum | Thu Jan 22 03:25:26 EST 2009 | stevewilde
What masking tape can people recommend for masking the board when conformal coating. I am using a PVA autocoat machine and humiseal 1B31. Current tape, is leaving residue on board when used to hold link wires down whilst glue cures and also when used
Electronics Forum | Thu Mar 05 22:08:14 EST 2009 | mleber
The dewetting is caused by using a silcone based adhesive. Select a tape that is acrylic based. Tapes are a high esd generator. Always use an ionizer.
Electronics Forum | Thu Nov 15 11:30:17 EST 2007 | mt396596
Could anyone recommend an esd safe masking tape for conformal coating that does not use a silicone based adhesive? I have looked into 3M's 7419 series and am awaiting samples, curious if there is another brand out there people have used. Thank you
Electronics Forum | Thu May 20 11:36:57 EDT 2010 | davef
Ansell ANS 11-100 HYFLEX (ESD) static dissipative coated Size||Ansell p/n||Techni-Tool p/n 7||ANS111007||328PR107 8||ANS111008||328PR108 9||ANS111009||328PR109 10||ANS1110010||328PR110
Electronics Forum | Tue May 25 12:17:44 EDT 2010 | markhoch
Dang, you're picky. Try buying your operators mittens, and then tell them that your company has discovered that mittens generate less ESD so they're making them mandatory now. Then...after a few hours, bring them their gloves back and tell them that
Electronics Forum | Tue May 25 07:19:13 EDT 2010 | jry74
I tried these and the operators didn't like them. The palm dip didn't slide well on tape and the finger tips were a bit bulky.
Electronics Forum | Wed Nov 09 10:21:30 EST 2005 | Amol
i am going to try it to use with Electrolube HPA. BTW we ran into a similar ptoblem, we just put pink mask on it to seal it off. still takes less time than to mask them with tape
winsouce.jpg)
