Electronics Forum | Sat Apr 19 12:00:07 EDT 2003 | modeltech
I am completely new to SMT design and for my next project I plan to use SMT for the first time. Since production volumes of the PCB's will be low, hand soldering is definitely an option, and will be necessary for my prototype PCB assembly. My proble
Electronics Forum | Mon Apr 21 08:55:35 EDT 2003 | russ
The pads you use for Reflow will be be fine for handsolder. Russ
Electronics Forum | Mon Apr 21 21:46:04 EDT 2003 | davef
We agree with Russ.
Electronics Forum | Mon Oct 03 05:10:19 EDT 2016 | robl
Hi Nikhilesh, It was a long time ago, but we used to buy the nickel in reels then had a cut and feed station on the smt machine with selectable sizes. We did many types of boards in very large volumes, and usually the Nickel strip was soldered to t
Electronics Forum | Tue Apr 22 05:38:56 EDT 2003 | mk
This sounds like a job for ssd. No pad shapes to worry about. Look into http://www.sipad.net and please contact me off line to discuss it. Matt Kehoe mkehoe@sipad.net
Electronics Forum | Thu Sep 02 21:02:55 EDT 1999 | Paul Wareham
We've noticed that there are many different recommendations for pad sizes for various SMT parts. This seems to vary wildly from manufacturer to manufacturer for the same case sizes. Is there any standards that can used used to specify these sizes?
Electronics Forum | Thu May 27 23:16:49 EDT 2004 | curious
thank you for the advice.
Electronics Forum | Wed May 26 05:05:04 EDT 2004 | curious
hi, we have a batch-rework for a axial 2-lead LED component. we are thinking of bending both ends of the axial-leads into a L-shape at 90degree angle, and solder the flat-end of the L-shape flatly to the PCB's SMT pad. hope the experienced guys/exp
Electronics Forum | Tue Sep 07 09:11:33 EDT 1999 | Dave F
| We've noticed that there are many different recommendations for pad sizes for various SMT parts. This seems to vary wildly from manufacturer to manufacturer for the same case sizes. Is there any standards that can used used to specify these sizes
Electronics Forum | Wed May 26 06:54:07 EDT 2004 | davef
Q1) if this is an acceptable component-lead modification? A1) Yes, it's acceptable Q2) and does this mod meet any existing IPC specs?(did a internet search but no result) Q2) IPC repair guidelines are: 7711A/7721A - Rework and Repair Guide For ot
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694